• 本课程为精品课,您可以登录eeworld继续观看:
  • Getting started with the VL6180X Explorer kit
  • 登录
课程介绍
The EVALKIT-VL6180X is an evaluation kit that provides an introduction to the proximity, ranging and light sensing capabilities of the VL6180X sensor, combined with the powerful STM32 F401RE microcontroller.

The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino™ connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized expansion boards.

The VL6180X plug-in features the VL6180X proximity sensor, based on ST’s FlightSense™, Time-of-Flight technology, and provides very accurate ranging information, as well as ambient light sensing (ALS) information. The range measurements are independent of the target reflectance.

Key Features

1 Nucleo board with STM32 F401RE microcontroller in LQFP64 package
Flexible board power supply
USB VBUS or external source (3.3 V, 5 V, 7 - 12 V)
Power management access point
1 VL6180X (proximity, gesture and ambient light sensing module) plug-in.
Slider switch controlling 2 functions:
4-digit display, displaying either the distance of a target from the proximity sensor or the lux value from the ambient light sensing (ALS).
Excellent ranging accuracy, independent of the reflectance of the target.
Equipped with Arduino UNO R3 connector.
RoHS compliant.
Full system SW supplied, download from www.st.com/vl6180x in the folder “Design resources.
VL6180X satellite board2 can be soldered to the plug-in board through flying wires, in order to integrate the VL6180X in customer’s application.
Basic gesture recognition application can be developed using the VL6180X sensor on the plug-in board or a dual sensor application by connecting a VL6180X satellite to the board.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    【瑞萨80212】基于蓝牙模块的温度采集和开关控制器
    [i=s] 本帖最后由 reayfei 于 2014-9-22 02:18 编辑 [/i]起初,打算做一个刷卡器模块,都买好RC522模块了,发现RC522模块仅支持3.3V系统,无奈放弃。手里正好有一块HC05蓝牙模块,正好拿来做个高端点的玩具。本设计的uart驱动代码,基于[url=https://bbs.eeworld.com.cn/thread-444004-1-3.html]code g
    reayfei 瑞萨电子MCU
    程序
    #include reg52.h#includeXPT2046.htypedef unsigned int u16;typedef unsigned char u8;sbit key1=P2^0;sbit key2=P2^1;sbit key3=P2^2;//--定义使用的IO口--//sbit PWM=P1^0;sbit LSA=P2^2;sbit LSB=P2^3;sbit LSC=P2^4;
    zhangchun123 51单片机
    关于TI芯片LM3S601,在IAR内调试问题~~~~
    在TI,LM3S601芯片上用程序进行编码器速度计算时,利用到SysCtlDelay()这个函数时,显示sysctlDelay未定义,但我sysctl.h或是sysctl .c都已经导入IAR了~~~make时还是通不过,这是什么原因?GO to definition sysctlDelay一直没反映
    5e2tjiang 微控制器 MCU
    求助 LPC1114的UCOS例程
    求助 LPC1114的UCOS例程求助LPC1114的UCOS例程?或者提供UC/OSii与ARM处理器相关的具体函数的例程?感激……
    52danpianji NXP MCU
    怎么样使阻容降压更加稳定
    附件中是我做的一个阻容降压的电路,但这个电源相当不稳定,老是把芯片冲击坏掉(芯片的5V电压管脚和GND直接短路,通了),自我改动:加了个Pi型滤波电路,但仍然没效果。新的一个想法是:用一个1:1的隔离变压器把市电隔离开来,但不知道变压器的电感和阻容降压的电容会不会形成振荡电路,从而弄坏整个线路。哪位前辈有经历过这种情况的,能不能教教我怎么解决,感激不尽!有遇到相同情况的朋友也可以进来讨论下,大家共
    n672757282 模拟电子
    UART FIFO
    今天我调试的时候,发现一个有点奇怪的问题,就是接收FIFO。FIFO的可以装下16字节的数据,我设置接收FIFO深度位7/8,当我发送14个数据的时候,这个时候是肯定不会发生超时中断的,这个效果也出来了。但是当我发送15个数据的时候,也不会发生超时中断,直到发送16个数据的时候才会发生超时中断。。。设置7/8深度的FIFO ,我看资料可至多14个数据,可我15个数据了啊...神奇+意外+不知所措.
    suguoliu 微控制器 MCU

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved