logo 大学堂

SensorTile基础培训视频品系列

SensorTile 共3课时 48分0秒
简介

The STEVAL-STLKT01V1 is a comprehensive development kit designed to support and expand the capabilities of the SensorTile and comes with a set of cradle boards enabling hardware scalability. The development kit simplifies prototyping, evaluation and development of innovative solutions. It is complemented with software, firmware libraries and tools, including a dedicated App.

The SensorTile is a tiny, square-shaped IoT module that packs powerful processing capabilities leveraging an 80 MHz STM32L476JGY microcontroller and Bluetooth low energy connectivity based on BlueNRG network processor as well as a wide spectrum of motion and environmental MEMS sensors, including a digital microphone.

SensorTile can fit snugly in your IoT hub or sensor network node and become the core of your solution.

Key Features

FCC (ID: S9NSTILE01) certified
IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
Included in the development kit package:
SensorTile module (STEVAL-STLCS01V1) with STM32L476, LSM6DSM, LSM303AGR, LPS22HB, MP34DT04, BlueNRG-MS, BALF-NRG-01D3 and LD39115J18R
SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
100 mAh Li-Ion battery
Plastic box for housing the SensorTile cradle and the battery
SWD programming cable
Software libraries and tools
STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming. It includes low level drivers for all the on-board devices
BLUEMICROSYSTEM1 and BLUEMICROSYSTEM2: STM32Cube expansion software package, supporting different algorithms tailored to the on-board sensors
FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32 ODE functional packs
ST BlueMS: iOS and Android demo Apps
BlueST-SDK: iOS and Android Software Development Kit
Compatible with STM32 ecosystem through STM32Cube support
SensorTile 开发套件入门,开发套件编程与调试

猜您喜欢

推荐帖子

四轴的总结报告
[i=s] 本帖最后由 paulhyde 于 2014-9-15 03:15 编辑 [/i]若是四轴的题目,那总结报告应怎么写~~~
一样yy 电子竞赛
基于单片机的电动自行车速度与里程表设计
系统概述本系统由信号预处理电路、单片机AT89C2051、系统化LED显示模块、串口数据存储电路和系统软件组成。其中信号预处理电路包含信号放大、波形变换和波形整形。对待测信号进行放大的目的是降低对待测信号的幅度要求;波形变换和波形整形电路则用来将放大的信号转换成可与单片机相连的TTL信号;通过单片机的设置可使内部定时器T1对脉冲输入引脚T0进行控制,这样能精确地算出加到T0引脚的单位时间内检测到的
maker 单片机
感谢有你--致敬我的爱人
爱人比我小八岁,从相识开始我就一直扮演一个如父如兄的角色,爱人也总是那么小鸟依人,就这样风风雨雨过了很多年.但是就在前年,这一切被一对双生子打破,两个儿子的呱呱坠地,打破了我们二人世界的所有平静.考虑到孩子的教育问题,我们决定不求助父母自己带孩子,这也意味着爱人从此升级为全职妈妈.大家都说,女人本弱,为母则强,事实确实如此,我去上班,家里大大小小的事情都需要爱人自己打理,每天下班进门,看到乖巧的宝
熊猫仙 聊聊、笑笑、闹闹
PWM的了解
[size=4]1、PWM是脉冲宽度调制信号,注意其中的“宽度”,就是脉冲的高电平的时间。PWM信号调节LED亮度时,信号频率是不变的,改变的是脉冲的高电平的时间,即LED的导通时间。这种信号调节亮度相当于调节LED的平均电流,所以电流会变化。[/size][size=4]2、从LED的V-I特性可知,其曲线是非线性的,0.1V的电压可造成100~200mA的If的变化,不易控制;另外,LED具有
Jacktang 模拟与混合信号
图中USD1120肖特基二极管的作用
请问图中USD1120肖特基二极管的作用是什么eeworldpostqq
量子阱 电源技术

讲师简介

eric_wang

推荐内容

EEWorld订阅号

EEWorld服务号

汽车开发圈

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

站点相关: 汽车电子 智能硬件

北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved