课程介绍
相关标签: SensorTile
The STEVAL-STLKT01V1 is a comprehensive development kit designed to support and expand the capabilities of the SensorTile and comes with a set of cradle boards enabling hardware scalability. The development kit simplifies prototyping, evaluation and development of innovative solutions. It is complemented with software, firmware libraries and tools, including a dedicated App.

The SensorTile is a tiny, square-shaped IoT module that packs powerful processing capabilities leveraging an 80 MHz STM32L476JGY microcontroller and Bluetooth low energy connectivity based on BlueNRG network processor as well as a wide spectrum of motion and environmental MEMS sensors, including a digital microphone.

SensorTile can fit snugly in your IoT hub or sensor network node and become the core of your solution.

Key Features

FCC (ID: S9NSTILE01) certified
IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
Included in the development kit package:
SensorTile module (STEVAL-STLCS01V1) with STM32L476, LSM6DSM, LSM303AGR, LPS22HB, MP34DT04, BlueNRG-MS, BALF-NRG-01D3 and LD39115J18R
SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
100 mAh Li-Ion battery
Plastic box for housing the SensorTile cradle and the battery
SWD programming cable
Software libraries and tools
STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming. It includes low level drivers for all the on-board devices
BLUEMICROSYSTEM1 and BLUEMICROSYSTEM2: STM32Cube expansion software package, supporting different algorithms tailored to the on-board sensors
FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32 ODE functional packs
ST BlueMS: iOS and Android demo Apps
BlueST-SDK: iOS and Android Software Development Kit
Compatible with STM32 ecosystem through STM32Cube support
SensorTile 开发套件入门,开发套件编程与调试
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    EK-TM4C123GXL LaunchPad 常用的几个PDF文档
    有些人问 ROM_SysCtlClockSet(SYSCTL_SYSDIV_2_5 | SYSCTL_USE_PLL | SYSCTL_OSC_INT |SYSCTL_OSC_MAIN | SYSCTL_XTAL_16MHZ);和 SysCtlClockSet(SYSCTL_SYSDIV_2_5 | SYSCTL_USE_PLL |SYSCTL_OSC_INT |SYSCTL_OSC_MAIN |
    ZhengLang 微控制器 MCU
    关于Z-STACK中绑定的问题
    最近项目中要用到CC2530构建无线传感网,利用一个CC2530(假设为A)管理底下的多个终端,终端上也是CC2530,负责采集数据或者受控。每个终端都有一个事先定好的固定的编号,最终要实现通过A来控制底下的所有终端,且能根据编号访问到固定的终端。我有以下问题烦请各位高手帮忙解答:1、Z-STACK中的协调器短地址是不是固定为0X0000,不能变?2、Z-STACK中的节点的短地址由协调器分配,因
    gbjj123 无线连接
    求助
    [i=s] 本帖最后由 paulhyde 于 2014-9-15 09:27 编辑 [/i]
    wh22d 电子竞赛
    WiFi协议智能灯光如何接入米家
    小白一枚,马上新装修,家里的智能核心以小米生态链产品为主,包括窗帘、开关、门锁等等,看过有线智能灯光控制,成本太高,小米的智能灯光呢主要是yeelight灯,光学太差,但是其他的智能控制系统我就不知道应该怎么接入米家了,听说米家IoT WiFi模组很便宜,请问有什么方式能让我的灯光接入米家吗?向大神求教!
    想智能 DIY/开源硬件专区
    ad6.9封装库元件命名(转)
    ad6.9封装库元件命名一、多引脚集成电路芯片封装SOIC、SOP、TSOP在AD7.1元器件封装库中的命名含义。例如:SOIC库分为L、M、N三种。L、M、N --代表芯片去除引脚后的片身宽度,即芯片两相对引脚焊盘的最小宽度。其中L宽度最大,N次之,M最小。--这里选择名称为SOIC_127_M的一组封装为例,选择改组中名为SOIC127P600-8M的封装。其中,127P --代表同一排相邻引
    sblpp PCB设计

    推荐内容

    热门视频更多

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved