STM32Cube HAL labs UART - UART poll SW4STM32-STM32CubeMX and STM32Cube HAL basics-EEWORLD大学堂

课程介绍

相关标签： PWM STM32 DMA CubeMX HAL

This MOOC is targeting anyone who starts working on STM32 by introducing STM32 ecosystem. You need some knowledge in C programming, and a NUCLEO-F401RE board for the hands-on.

Welcome to STM32Cube basics training!
In this course we want to present you how to work with STM32 ecosystem. The course is focused on explanation of STM32CubeMX tool, how to handle basic tasks and use tool for basic project creation.

The course is structured in two parts. The first part is related to STM32CubeMX and MCU configuration:
- STM32 selection
- Pin-out configuration
- Clock configuration
- Peripheral configuration
- Power calculator
- Project generation settings

The second part is related to STM32Cube HAL library which is used for developing your application:
- HAL library structure
- Handles and callbacks
- Interrupts
- DMA
- Basic HAL usage

All these points are developed in presentation and hands-on.

What are the requirements?
You need some knowledge of C programming language and a NUCLEO-F401RE board for the hands-on (please refer to your local ST distributor for an offer).

What am I going to get from this course?
Understand STM32CubeMX tool, and be able to work with STM32Cube HAL library and navigate in its structure

What is the target audience?
Anyone who wants to start developing on STM32 MCUs and never worked with STM32CubeMX and the HAL library. Or for someone who worked with previous standard peripheral library on ST products and wants to understand the STM32Cube ecosystem.

显示全部 ↓

用户评论

: bingdongshijian; In this course we want to present you how to work with STM32 ecosystem. The course is focused on explanation of STM32CubeMX tool, how to handle basic tasks and use tool for basic project creation.; 2020年03月23日 21:24:46回复|顶()

: 54chenjq; In this course we want to present you how to work with STM32 ecosystem. The course is focused on explanation of STM32CubeMX tool, how to handle basic tasks and use tool for basic project creation.; 2020年03月21日 08:29:33回复|顶()

猜您喜欢

推荐帖子

【视频分享】2012全国电赛TI杯模拟电子系统设计专题邀请赛精彩全纪录: 本视频包括赛前培训；宣读竞赛规则和选择竞赛题目；讨论设计方案；领取元器件；焊接制作；完成作品并调试；学生交流心得和颁奖环节，全程记录了TI杯电赛的精彩过程，希望可以给将要参加TI杯电赛的同学有所帮助。[flash]http://player.youku.com/player.php/sid/XNTAxNzgyMTQ0/v.swf[/flash]欲知更多精彩视频，请查看我的其他分享~; 德州仪器_视频模拟电子

wince5.0不支持directsound, 那用directsound开发的程序该怎么办: 我现在想把一个VC下用directsound开发的程序转到EVC下，用PB定制内核时发现CE5.0不支持directsound,开发板是5.0的BSP包，我该怎么办？谢谢！; liyanjun120 WindowsCE

51单片机编程技巧: [font=宋体][size=3]1.定义的变量不要太多。低128位为用户定义变量的存放区域（默认时），也可以把变量放在高128位，但容易出错，尽量少放，最好不放。通过M51可以查看内存变量的存放，最好不要超过110个字节，否则程序无法运行或出错。 [/size][size=3]2.如一个变量多处使用可定义为全局变量。例如循环变量i、j，尽量减少参数传递。 [/size][size=3]3.静态变; SZXYD123 51单片机

如何修改BBB LCD7 的device tree 文件: 大家好，我搞LCD Cape 已经有好一段时间了，但是成果甚微。想请教大家应该如果编写或者修改lcd7的device tree 文件呢？我使用的是群创的七寸屏，AT070TN83我是这样做的：首先在/lib/firmware/目录下执行 cp BB-BONE-LCD7-01-00A2.dts BB-BONE-LCD7-01-00A5.dts。然后使用vi打开BB-BONE-LCD7-01-00A5; 651927693 DSP 与 ARM 处理器

求助: RS485中是AB时为逻辑1（正逻辑）还是BA时为逻辑1，今天看到两种说法，但支持前者居多，但还是想确认一下; zzbaizhi 微控制器 MCU

亿海微FPGA工具eLinx2.1.1软件手册，我有权分享吗？: 这个软件申请licence比较麻烦，在官网提交后要等几天，会有人给你打电话，询问一些情况后加你微信，然后给你申请，申请完成后会通过微信发给你。前边的过程我已经经历过了，我想把软件手册传上来，让有需要的网友可以先了解下，不过遇到点问题。这个软件不能说和Vivado很像，只能说基本一样，属于简化版的Vivado，学习起来还是比较方便的。不过Block Design功能还在弄，以后应该会推出来。只可惜当; littleshrimp 国产芯片交流

大学堂

您的位置：EEWORLD大学堂 / 嵌入式开发 / 微控制器（MCU） / STM32CubeMX and STM32Cube HAL basics / STM32Cube HAL labs UART - UART poll SW4STM32

推荐视频

用户评论

推荐内容

热门视频更多

开源项目推荐更多

热门文章更多