STM32Cube HAL labs SPI - Lab SPI Poll-STM32CubeMX and STM32Cube HAL basics-EEWORLD大学堂

课程介绍

相关标签： PWM STM32 DMA CubeMX HAL

This MOOC is targeting anyone who starts working on STM32 by introducing STM32 ecosystem. You need some knowledge in C programming, and a NUCLEO-F401RE board for the hands-on.

Welcome to STM32Cube basics training!
In this course we want to present you how to work with STM32 ecosystem. The course is focused on explanation of STM32CubeMX tool, how to handle basic tasks and use tool for basic project creation.

The course is structured in two parts. The first part is related to STM32CubeMX and MCU configuration:
- STM32 selection
- Pin-out configuration
- Clock configuration
- Peripheral configuration
- Power calculator
- Project generation settings

The second part is related to STM32Cube HAL library which is used for developing your application:
- HAL library structure
- Handles and callbacks
- Interrupts
- DMA
- Basic HAL usage

All these points are developed in presentation and hands-on.

What are the requirements?
You need some knowledge of C programming language and a NUCLEO-F401RE board for the hands-on (please refer to your local ST distributor for an offer).

What am I going to get from this course?
Understand STM32CubeMX tool, and be able to work with STM32Cube HAL library and navigate in its structure

What is the target audience?
Anyone who wants to start developing on STM32 MCUs and never worked with STM32CubeMX and the HAL library. Or for someone who worked with previous standard peripheral library on ST products and wants to understand the STM32Cube ecosystem.

显示全部 ↓

用户评论

: bingdongshijian; In this course we want to present you how to work with STM32 ecosystem. The course is focused on explanation of STM32CubeMX tool, how to handle basic tasks and use tool for basic project creation.; 2020年03月23日 21:24:46回复|顶()

: 54chenjq; In this course we want to present you how to work with STM32 ecosystem. The course is focused on explanation of STM32CubeMX tool, how to handle basic tasks and use tool for basic project creation.; 2020年03月21日 08:29:33回复|顶()

猜您喜欢

推荐帖子

晶振问题请教: 今天调试STM32F103RCT6,发现一个问题，就是用以前的库程序根本不运行，用最新的3.10，发现程序总是停在 while((RCC-CRRCC_CR_PLL2RDY) == 0){}这里而不在执行，软件仿真也是停在这里，把这句话去掉可以正常运行。另外那个和晶振并接的电阻现在还需要吗，加或不加对稳定性有没有影响，请香主帮忙看看。; wisper stm32/stm8

ADS1.2 调用strtoul(str,NULL,0,NULL),地址0的内容会被更改: strtoul的定义：unsigned long strtoul(const char *str, char **endptr, int requestedbase, int *ret)可见ADS1.2会把NULL指针指向地址0，但是地址0放着复位向量，怎么样才能不改变0地址的内容呢？(当然在调用的时候可以不用NULL，而定义一个临时的地址，但要改动的地方太多了。); aiwenwen 嵌入式系统

GPRS连接问题: 我用OPEN AT 已经建立完成了GPRS激活部分，但是为什么数据流中什么都收不到，在超级终端里使用ATD*99***1#,可以收到PPP包，如何使用OPEN AT ADL也能收到这些PPP包？请指教一二！我在软件里已经加入了AT命令，但是没有任何反应，到底是什么地方出了问题啊; lockwe 嵌入式系统

MCS-51单片机定时器问题: MCS-51单片机中,采用12Mhz时钟,定时器T0采用模式1(16位计数器),请问在下面程序中,p1.0的输出频率？MOV TMOD,#01HSETB TR0LOOP:MOV TH0,#0B1HMOV TL0,#0E0HLOOP1:JNB TF0,LOOP1CLR TR0CPL P1.0SJMP LOOP; yichi7758 嵌入式系统

【晒经典】五路继电器模块电路: [i=s] 本帖最后由 dontium 于 2015-1-23 12:46 编辑 [/i] 继电器是一种电控制器件。它具有控制系统（又称输入回路）和被控制系统（又称输出回路）之间的互动关系。通常应用于自动化的控制电路中，它实际上是用小电流去控制大电流运作的一种“自动开关”。故在电路中起着自动调节、安全保护、转换电路等作用。当输入量(如电压、电流、温度等)达到规定值时，继电器使被控制的输出电路导通或; 37°男人模拟与混合信号

磁钉导航AGV小车的LIS2MDL阵列磁体位移数据采集: [i=s] 本帖最后由 littleshrimp 于 2020-10-19 19:44 编辑 [/i]9月30号买的磁铁，卖家地址填错发到了别的城市，补发后我17号才收到本来特地买了几个径向充磁的，收到后结果全者是轴向充磁，卖家说标题写错了，径向没现货需要定制买不到径向的只能临时拿轴向的替代为了测试磁体在不同位置上传感器我还买了一个直径滑台先把磁铁粘到滑台上，然后测试得到一个合适的间距把传感器阵列; littleshrimp ST传感器与低功耗无线技术论坛

大学堂

您的位置：EEWORLD大学堂 / 嵌入式开发 / 微控制器（MCU） / STM32CubeMX and STM32Cube HAL basics / STM32Cube HAL labs SPI - Lab SPI Poll

推荐视频

用户评论

推荐内容

热门视频更多

开源项目推荐更多

热门文章更多