STM32Cube HAL theory GPIO - Lab GPIO2 read pin manuall-STM32CubeMX and STM32Cube HAL basics-EEWORLD大学堂

课程介绍

相关标签： PWM STM32 DMA CubeMX HAL

This MOOC is targeting anyone who starts working on STM32 by introducing STM32 ecosystem. You need some knowledge in C programming, and a NUCLEO-F401RE board for the hands-on.

Welcome to STM32Cube basics training!
In this course we want to present you how to work with STM32 ecosystem. The course is focused on explanation of STM32CubeMX tool, how to handle basic tasks and use tool for basic project creation.

The course is structured in two parts. The first part is related to STM32CubeMX and MCU configuration:
- STM32 selection
- Pin-out configuration
- Clock configuration
- Peripheral configuration
- Power calculator
- Project generation settings

The second part is related to STM32Cube HAL library which is used for developing your application:
- HAL library structure
- Handles and callbacks
- Interrupts
- DMA
- Basic HAL usage

All these points are developed in presentation and hands-on.

What are the requirements?
You need some knowledge of C programming language and a NUCLEO-F401RE board for the hands-on (please refer to your local ST distributor for an offer).

What am I going to get from this course?
Understand STM32CubeMX tool, and be able to work with STM32Cube HAL library and navigate in its structure

What is the target audience?
Anyone who wants to start developing on STM32 MCUs and never worked with STM32CubeMX and the HAL library. Or for someone who worked with previous standard peripheral library on ST products and wants to understand the STM32Cube ecosystem.

显示全部 ↓

猜您喜欢

推荐帖子

TI电源使用小提示—开发板抢购_2: 用过TI的DC-DC，有一点小经验。TPS5XXXX，忘了哪个具体型号了。外围电路有电感和电容，在做某项试验时，发现电源输出纹波过大，导致dsp和fpga不能正常工作。经过反复试验排查，发现是由于低温时电感的感抗值发生了变化，当初选的是国产电感，后来换为进口的就没事了。此外，dsp和fpga的内核电压设计也要加上保护才更保险。因此，电源设计一定要注意这个准则。一是不要干扰别人，二是要保护自己。; jlqsczw_2007 模拟与混合信号

安防监控、监控工程(深圳市鑫达莱科技有限公司网络监控部): [table=98%][tr][td]深圳市鑫达莱科技有限公司网络工程部是由在台湾著名的CCTV 厂商杰士安(JSA-CCTV)电子股份和鑫达莱公司注资支持下而成立的智能化系统集成公司，是一家专业提供视频监控系统、防盗报警系统、停车场系统、网络工程等智能化系统集成为一体的高科技企业。[/td][/tr][tr][td=2,1]鑫达莱科技网络工程部在公司总部强大的资金支持及杰士安先进的技术优势，吸; nihayer 工业自动化与控制

3d图上为什么会显示一根线？: 如下图。; ljx123 PCB设计

关于堆栈溢出请教: //端口2中断//#pragma vector=PORT2_VECTOR__interrupt void waterflow(){if((P2IFGBIT1)==BIT1)//插卡进入信号中断{SET_GIE;P2IE=~BIT1;P2IFG=~BIT1;//清除中断标志....P2IE|=BIT1;LPM3_EXIT;}如果频繁插卡，就会堆栈溢出，显示混乱。这怎么处理阿，F413有堆栈溢出中断吗; jhxajh 微控制器 MCU

编制内核问题请教: 哪位遇见过这样的问题？怎么解决啊？帮帮忙吧！CeNlsCmp:Total for all locales: 77588 bytesCeNlsCmp: Writing out calendarsCeNlsCmp:Calendar 1: 28 bytesCeNlsCmp:Total for all calendars: 28 bytesCeNlsCmp: Writing out code pagesC; xuesong999 嵌入式系统

R5F1056A 设备文件找不到: R5F1056A 设备文件找不到请大神发一份给我谢谢 157496687@qq.com; dtrabbit8 瑞萨电子MCU

大学堂

您的位置：EEWORLD大学堂 / 嵌入式开发 / 微控制器（MCU） / STM32CubeMX and STM32Cube HAL basics / STM32Cube HAL theory GPIO - Lab GPIO2 read pin manuall

推荐视频

推荐内容

热门视频更多

开源项目推荐更多

热门文章更多