STM32CubeMX project settings - Advanced settings-STM32CubeMX and STM32Cube HAL basics-EEWORLD大学堂

课程介绍

相关标签： PWM STM32 DMA CubeMX HAL

This MOOC is targeting anyone who starts working on STM32 by introducing STM32 ecosystem. You need some knowledge in C programming, and a NUCLEO-F401RE board for the hands-on.

Welcome to STM32Cube basics training!
In this course we want to present you how to work with STM32 ecosystem. The course is focused on explanation of STM32CubeMX tool, how to handle basic tasks and use tool for basic project creation.

The course is structured in two parts. The first part is related to STM32CubeMX and MCU configuration:
- STM32 selection
- Pin-out configuration
- Clock configuration
- Peripheral configuration
- Power calculator
- Project generation settings

The second part is related to STM32Cube HAL library which is used for developing your application:
- HAL library structure
- Handles and callbacks
- Interrupts
- DMA
- Basic HAL usage

All these points are developed in presentation and hands-on.

What are the requirements?
You need some knowledge of C programming language and a NUCLEO-F401RE board for the hands-on (please refer to your local ST distributor for an offer).

What am I going to get from this course?
Understand STM32CubeMX tool, and be able to work with STM32Cube HAL library and navigate in its structure

What is the target audience?
Anyone who wants to start developing on STM32 MCUs and never worked with STM32CubeMX and the HAL library. Or for someone who worked with previous standard peripheral library on ST products and wants to understand the STM32Cube ecosystem.

显示全部 ↓

用户评论

: bingdongshijian; In this course we want to present you how to work with STM32 ecosystem. The course is focused on explanation of STM32CubeMX tool, how to handle basic tasks and use tool for basic project creation.; 2020年03月23日 21:24:46回复|顶()

: 54chenjq; In this course we want to present you how to work with STM32 ecosystem. The course is focused on explanation of STM32CubeMX tool, how to handle basic tasks and use tool for basic project creation.; 2020年03月21日 08:29:33回复|顶()

猜您喜欢

推荐帖子

紧急求助: 各位高手们,本人有一选型问题要求助呀,我现在决定用MSP430单片机做一个温度压力的变送器,要求是低功耗,有实时时钟系统,两个模拟量输入,1KB的EEPROM,体积小,引脚少,用于定时采样两路模拟量,但是现在不知道选哪个型号的MSP430,希望各位高手给点建议,谢谢!; panama 微控制器 MCU

Zigbee无线模块|TI CC2530芯片|兼容GPS1613封装|透明传输: 一、模块功能HCV104是一款1613小封装模块，专为低成本、低功耗、低电压、工作在2.4GHz的ISM频段的无线Zigbee模块，基于IEEE 802.15.4协议开发，主要应用在LED路灯、办公场所及家庭、工业等LED调光领域。系统采用了标准ZIGBEE无线技术，符合工业标准应用的无线数据通信模块，它具有安装尺寸小、通讯距离远、抗干扰能力强、组网灵活等优点和特性；可实现多设备间的数据透明传输；; homagui RF/无线

ad16: zttian PCB设计

查看TI原理图的好工具CadSoft Eagle Professional 6.4.0 + patch: [url=http://pan.baidu.com/share/link?shareid=491157&uk=168446269]http://pan.baidu.com/share/link?shareid=491157&uk=168446269[/url][[i] 本帖最后由 qinkaiabc 于 2013-4-11 08:11 编辑 [/i]]; qinkaiabc PCB设计

TI工程师教你如何正确选择电源IC: 正确选择电源的集成电路(IC)表面上看似易如反掌。然而，随着需要多电源电压轨的消费类电子产品的推出，这项工作变得愈发复杂。当选择实际工作中所需的IC时，必须考虑成本、解决方案的外形尺寸、电源、占空比以及所需的输出功率等诸多因素。另外，必须根据重要性和相应选择的电源，对这些因素进行排序。在本文中，我们将确定附图1所示电源的最佳解决方案。示例应用中采用的是便携式电源，同时要求最大程度地降低功耗以及减小; tiankai001 模拟与混合信号

MOSFET的开关电压Vgs: 如题。请问一下，MOSFET的手册里面哪个参数能看的出来，当其作为开关管，完全打开的时候，Vgs的电压？同事跟我讲，默认12V大多数都可以完全打开(NMOS)。低于12V就有点悬，MOS打开不完全，会导致Rds的电阻过大，MOS管发热。所以他现在设计的电路图，基本上都是12V打开MOS管。举个例子，如下图; 平漂流模拟电子

大学堂

您的位置：EEWORLD大学堂 / 嵌入式开发 / 微控制器（MCU） / STM32CubeMX and STM32Cube HAL basics / STM32CubeMX project settings - Advanced settings

推荐视频

用户评论

推荐内容

热门视频更多

开源项目推荐更多

热门文章更多