• 本课程为精品课,您可以登录eeworld继续观看:
  • SERVICE-ENTRANCE CABLES - 230.51(A)
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    eboot 下载 nk 出现错误
    我用编译好的eboot 下载nk.bin ,老是出现Checksum failure on record , ABORT!!! ******不知道是什么原因? 是不是 cs8900a 不稳定造成的?我的平台S3C2440 + 64M NANDFLASH + 64M RAM wince5.0
    stevezlf 嵌入式系统
    Stellaris® MCU 的 Cortex 微控制器软件接口标准 (CMSIS):DSP 头文件
    TI新出的资料Stellaris MCU 的 Cortex 微控制器软件接口标准 (CMSIS):DSP 头文件
    蓝雨夜 微控制器 MCU
    DSP28335—CMD文件解读
    CMD文件里有两个基本的段:初始化段和非初始化段。初始化段包含代码和常数等必须在DSP上电之后有效的数。故初始化块必须保存在如片内FLASH等非易失性存储器中,非初始化段中含有在程序运行过程中才像变量内写数据进去,所以非初始化段必须链接到易失性存储器中如RAM。已初始化的段:.text,.cinit,.const,.econst,.pinit和.switch.text:所有可以执行的代码和常量.c
    灞波儿奔 DSP 与 ARM 处理器
    单片机编程入门视频教程书籍推荐,零基础手把手教你学好单片机。
    这几天看到很多学友,不知怎么进行51单片机的学习。想学好单片机其实并不困难,单片机是一门实践性非常强的学科,学习时要理论怀实践并重,现在网上学习单片机的资料比较多,重也不是每一个都适合自学,教程其实也没什么好坏,只是带你进门。选教程最好是选带有配套视频的,在学校期间用的是王云的51单片机教材,个人觉得比较适合初学,给大家分享下,结合书带的云龙51教学视频学习基本上就够了,再找块开发板练习,接下来只
    fasetr 51单片机
    MSP430G2553的IO口输出
    用G2553的P1端口作为普通的IO口驱动L298N模块,问题是模块连上5V的直流电机后,电机两端的电压才1.55V,并不是5V,这是什么原因导致的呢?
    易爆炸弹 微控制器 MCU
    把kernel从vivi向u-boot移植的时候遇到问题了!
    三星提供的kernel是for vivi 的,但俺想用u-boot来引导,结果移植上去之后,u-boot是跑起来了,但是引导kernel却出问题了看了kernel的头部的二进制数据,发现kernel的格式竟然还和bootloader的类型有关,for vivi的kernel的头就是适合vivi,不适合u-boot的,这下郁闷了,不知道我发现的对不对,也不知道怎么改,各位同学有感兴趣的么?或者有经验
    04616115 嵌入式系统

    推荐内容

    热门视频更多

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved