• 本课程为精品课,您可以登录eeworld继续观看:
  • (b) AVAILABLE SHORT-CIRCUIT CURRENT - 110.9, 110.10, AND 230.24
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    瑞萨电子设计大赛--家用用电无线控制定时器 之二 通用IO和复用IO
    [i=s] 本帖最后由 damiaa 于 2015-11-15 15:18 编辑 [/i]瑞萨电子设计大赛--家用用电无线控制定时器 之二 通用IO和复用IO瑞萨单片机和其他的一样。IO有的可以做通用IO也可以做复用IO(比如模拟,PWM,SPI UART等功能)。下面就这些方面讨论一下端口寄存器:P0,P1,P4,P12,P13设定端口输出锁存器值的寄存器这个好理解,如果你要输出什么值就给什么值
    damiaa 瑞萨电子MCU
    请教香主,STM32有内置的硬件CRC计算单元吗?
    请问香主,我在www.stmfans.com里面看到了一个帖子说STM32有内置的硬件CRC计算单元,我在库文件、datasheet上都没有找到。请问真是的是有吗?如果有,在那个模块?stmfans的链接如下:http://www.stmfans.com/bbs/viewthread.php?tid=325&highlight=crc
    fujike029 stm32/stm8
    求教2812 ad问题
    各位好:我在ad程序里添加了两个变量:floatin_voltage[NP];floatstep_h[NP];后出现这个错误error: can\'t allocate .ebss (sz: 00002898 page: 1) in DRAMH0 (avail:00000f7c)error: errors in input - ./Debug/AD.out not built然后我到cmd里调大D
    lemonnofeeling 微控制器 MCU
    请问各位前辈帮指点一下晚辈 甚是感谢
    请问各位前辈 我想知道怎么调节两相占空比相同 相位相差一定角度 比如60 度 90度 在430中应该怎么设定啊
    t_shaojun126 微控制器 MCU
    15v转3.3v的片子谁用过?
    给fpga供电,15v直接转3.3v,以前买别人的但是给片子型号磨掉了,现在想自己做板子,已经知道我们小仪器用的同功能板子是RT9169直接转3.3,然后用KRC107_9S稳流,有没有谁知道大的这个是什么片子?原理应该也是直接转3.3v然后稳流,对电源这块不大了解,求大神指点
    yym86202 电源技术
    当低EMI电源遇上拥挤的电路板,你该怎么办?
    [i=s] 本帖最后由 qwqwqw2088 于 2019-11-15 08:20 编辑 [/i]有限且不断缩小的电路板空间、紧张的设计周期以及严格的电磁干扰(EMI)规范(例如CISPR 32和CISPR 25)这些限制因素,都导致获得具有高效率和良好热性能电源的难度很大。在整个设计周期中,电源设计通常基本处于设计过程的最后阶段,设计人员需要努力将复杂的电源挤进更紧凑的空间,这使问题变得更加复杂
    qwqwqw2088 模拟与混合信号

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved