• 本课程为精品课,您可以登录eeworld继续观看:
  • CHAPTER 5 ARTICLES 500 – 590
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    【求助】关于SD16在输入通道短路后采样数据不为零
    SD16在F42X0出现,我在使用F4250的时候发现这样一个问题,就是用通道7测量失调 电压与将AD输入端口短路(我是在芯片引脚上短路的,应该不会引入其它的干扰信号)测得的电压不同.我在用通道7测得各个PGA放大倍数的失调电压后,再切换到通道0,将通道0短路后再采样通道0的电压,数据经过修正后并不为0,而是一个固定的数值,下面的数据是经过修正后的值.放大倍数数据Offset_1-12Offset
    asoni 微控制器 MCU
    如何测试单片机系统的可靠性
    读者希望了解用用什么方法来测试单片机系统的可靠性,邓宏杰指出:“当一个单片机系统设计完成,对于不同的单片机系统产品会有不同的测试项目和方法,但是有一些是必须测试的:1.测试单片机软件功能的完善性。这是针对所有单片机系统功能的测试,测试软件的写的正确完整。2.上电、掉电测试。在使用中用户必然会遇到上电和掉电的情况,可以进行多次开关电源,测试单片机系统的可靠性。3.老化测试。测试长时间工作情况下,单片
    牛默默 单片机
    新手学习vxworks需要怎么入门
    我想学习vxworks,需要准备什么东西?用什么编程环境?
    zhangdaoyong 实时操作系统RTOS
    micropython的串口接收驱动 irqUART
    将串口接收功能封装了一下,更加通用,使用也更加方便了。特点:接口简单支持自定义串口接收回调函数支持自定义数据包(Frame)回调函数可以设置数据包超时时间支持STM32/ESP32驱动地址[hide]https://github.com/micropython-Chinese-Community/mpy-lib/tree/master/misc/irqUART[/hide]使用方法from mac
    dcexpert MicroPython开源版块
    华大HC32L136使用时深度睡眠的问题及解决
    问题:HC32L136J8TA-LQ48,调试过程中遇到问题,打开过PLL后再进入深度睡眠模式时,电流有26uA,根据官方例程gpio_deepsleep_wakeup来做实验,官方例程直接编译然后烧到板子,进入深度睡眠模式后,电流0.8uA左右浮动,如将时钟设置到PLL,如PLL48MHz后,进入深度睡眠模式,电流就26uA。代码:如下图片所示代码,是根据官方例程gpio_deepsleep_w
    Jacktang 国产芯片交流
    CCS6的新界面
    好像CCS6有些改变,大家可以到wiki去下载
    平湖秋月 微控制器 MCU

    推荐内容

    热门视频更多

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved