• 本课程为精品课,您可以登录eeworld继续观看:
  • BONDING - 504.60(A) AND (B)
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    吉时利今日发布高电压数字源表®2657A
    美国俄亥俄州克里夫兰,2012年3月19日讯–先进电气测试仪器与系统的世界级领导者吉时利仪器公司今日发布2657A高功率数字源表。2657A为吉时利2600A系列高速、精密源测量单元数字源表系列产品增加了高电压功能。此系列仪器能帮助吉时利客户分析范围更宽的功率半导体器件和材料。2657A内建3,000V、180W源,支持以极低的成本向被测器件输出5倍于最接近竞争系统的功率,并且,构建至2657A的
    Jack_ma 测试/测量
    F28035的ADC模块ONESHOT模式
    根据F28035的编程手册,其ADC外设有一个ONESHOT Single Conversion Support的功能,有点没明白:28035的ADC是通过SOC编号配置的,一个或多个触发信号触发指定的一个或多个通道的转换,或工作在同步转换模式。这里ONESHOT是个什么模式,而且仅支持在Round Robin wheel上的通道,能否请TI的老师指点一下:1、这个模式是如何工作的。2、round
    Zero 微控制器 MCU
    我是Aman我自豪,又玩了次ST7的汇编。
    有史以来最花时间的芯片:ST7芯片ICP编程支持固件开发完成上个星期有ST代理商提出需要手持机支持ST7一款FLASH芯片。粗看资料后,时序并不难对付,即应允开发。感谢该代理商很快的寄来了样片。本以为2天即可搞定,不料竟花了4天时间,总计达30多小时。主要有以下难点:1、该芯片的编程有关时序的资料不全,且分布在数个文档中。而这些文档中的说明都针对其他ST7芯片。估计这个芯片是比较新的ST7。经过多
    FU33 stm32/stm8
    关于PC与8255通信的问题
    做了一个8255扩展的非标准的键盘 与PC通信现在不明白的是8255怎么与PC通信PC 上那么多端口怎么具体分配到8255上呢谢谢了
    li139 嵌入式系统
    汽车安全-车载行人检测实验
    [i=s] 本帖最后由 shidaikeji 于 2014-6-27 23:01 编辑 [/i][url=https://bbs.eeworld.com.cn/thread-372933-1-1.html]https://bbs.eeworld.com.cn/thread-372933-1-1.html[/url]之前实验了检测车辆现在移植到dsp 上进行人检测实验。当行驶车辆前方有行人时,进行提
    shidaikeji 汽车电子
    【ufun学习】实战篇1:《PWM控制直流电机加减速正反转》
    [i=s] 本帖最后由 1nnocet- 于 2019-7-23 14:50 编辑 [/i]《PWM控制直流电机加减速正反转》由于近期比较忙这里做简单介绍:该篇使用TIM3的通道3和通道4来输出两路PWM。可以通过触摸按键控制占空比。下面为系统的主要框图:整个系统由以上几部分组成,以ufun为主控模块,控制电机驱动电路;通过触摸键盘设置输出PWM波的占空比,控制电机转动的快慢;设置两个GPIO口决
    1nnocet- 单片机

    推荐内容

    热门视频更多

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved