• 本课程为精品课,您可以登录eeworld继续观看:
  • FACTOR IN PROTECTION
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    方向性无线传输
    有没有人知道目前哪种技术可以实现方向性无线传输?注意:1.无线2.方向性。比如红外。3.有一定的穿透能力。4.速度不低于2k/s。
    SAM1978 嵌入式系统
    编码器使用外部中断计算出现了问题,求大神指导。。
    光电编码器AB引脚。A引脚接外部中断INT0,B引脚接P2^2引脚,编码器接了上拉电阻,信号产生高低电平非常精确,但是在显示的时候,数码管计数只增不减,不知道哪里出问题了,求大神指导!!#include#define uint unsigned int#define uchar unsigned char//sbit BMA=P3^2;sbit BMB=P2^2;sbit dula=P2^6;sb
    476455859yugang 51单片机
    怎么才能查看自己回复帖子在几楼啊?
    怎么才能查看自己回复帖子在几楼啊?貌似论坛还没有这个功能吧?有时候一个帖子楼层很高,而自己发帖又在中间,怎么才能定位到自己的楼层呢?
    zhangdaijinqf 为我们提建议&公告
    【跟TI学电源】系列-----高效开关模式充电器系统设计
    诸如平板电脑和智能手机等便携式设备的迅速增长和不断涌现,要想实施电池管理以达到更高的电池供电系统性能,变得越来越困难。电池管理系统必须拥有一定的智能,以支持各种适配器类型和电池化学物质,并提高电池充电效率。与此同时,提供良好的用户体验也越来越重要,例如:系统快速开机、长电池使用时间和快速充电等。本文将讨论如何利用输入电流和输入电压型动态电源管理 (DPM) 控制来提高电池充电性能,以防止系统崩溃以
    qwqwqw2088 模拟与混合信号
    编译错误
    代码如下:module comp1(ina,inb,clk,out1,out2);input ina,inb;input clk;output out1,out2;reg out1,out2;always @(ina,inb)beginif(inainb)out1=1;else out1=0;endalways @(posedge clk)beginif(inainb)out2=1;else ou
    eeleader-mcu FPGA/CPLD
    Quartus 9.0 编译modelsim 仿真库
    各位大侠:我安装的quartus8.1 想编译VHDl库文件,利用modelsim 做功能仿真,网上说编译这些库是有顺序的,从网上也找了多个版本尝试无果,不知道哪位朋友可否帮忙解决?万分感谢。
    qixiao FPGA/CPLD

    推荐内容

    热门视频更多

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved