• 本课程为精品课,您可以登录eeworld继续观看:
  • BRANCH CIRCUIT - 411.7
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    谁可以写个这样的程序给我来参考参考啊
    有哪位大虾帮我这个新手编一下面的程序,小弟感觉不尽。要求:1用msp430g2553.h实现。2实现如下功能,每十秒钟灯光闪烁一次,每2秒灯光亮度变化一次,按键按一次延时时间增加5秒灯光亮度变化相反。
    sgy52401314 微控制器 MCU
    LPC1788开发板制作
    请问有哪位大侠做过关于LPC1788的开发板,能不能给点建议,由于本人是第一次做这样的系统板,请多多帮助,不知道有没有什么参考资料!谢谢:loveliness:
    2004dzxxx NXP MCU
    linux 系统时间同RTC时间有很大误差,???求助!!!
    [i=s] 本帖最后由 yupc123 于 2016-1-30 11:06 编辑 [/i]linux 系统时间同RTC时间有很大误差,而校时命令[color=#494949][backcolor=rgb(226, 226, 226)][font=simsun][size=2]djtimex --compare不支持,得不到准确的误差值,不知怎么校时??[/size][/font][/backcol
    yupc123 Linux开发
    图像算法移植的DSP需要做哪些工作
    需要把已经写好的算法,移植到你的DSP开发板上并很好的跑起来,需要做哪些工作呢?下面我分两部分来讲,第一分部是移植,第二部分为算法优化移植:1)如果你的算法是基本opencv这样的基本上开发的,你需要脱离opencv的环境。2)如果你的算法是C++语言,请你改成标准的C语言。虽然DSP的开发环境是支持C++的,但是不建议你这么做。3)修改你算法的内存分配,尽量内存一次分配好,DSP在算法不断的申请
    fish001 DSP 与 ARM 处理器
    有关串口问题请教
    各位大哥。我想做个微机的串口通信程序。。。但是不知道怎么下手。。我也在网上看咯一些资料。。还是不怎么明白。。请大家指点。。或给我个列子。。。我的邮箱[email]WLH1211@126.com[/email]谢谢
    wlh1204 单片机
    关于无线网络的设计
    小弟现在接到上头一份任务,就是设计一个无线网络协议出来。可能有几百个节点(Node),每个结点之间要能互相通信,网络使用无线电波作为传输的介质。在同一时刻只能有一个节点发送数据。小弟以前都是做软件的,TCP/IP网络协议倒是研究过,但是要设计一个网络协议感觉一点头绪都没有啊,哪位高高手或有这方面的经验的好心人给我指点指点。小弟万分感谢。
    liurse 嵌入式系统

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved