• 本课程为精品课,您可以登录eeworld继续观看:
  • AVAILABLE FAULT CURRENT - 110.24(A) AND (B)​​​​​​​
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    程序下载不了
    开发板是新买的,本人刚学单片机。。。板拿到手我就在试,刚开始能把程序烧录进单片机,但是我想换程序,按原来的步骤,却下载不了,提示供电时我就按下开关,然后蜂鸣器就响,它响是不连续的,不像单片机插反那样响,是滴一声,各一下又滴一声。。。我换了另一个单片机(原来有程序在里面了,也是刚才第一次下载进去的),没用变化,程序还是原来那样。。。那个isp没有显示下载成功,就一直停在“给...供电”,是怎么回事呢
    wt418995874 51单片机
    按键消抖 代码 为什么没有输出呢
    module sw_debounce(clk,res_n,sw1_n,sw2_n,sw3_n,led1_n,led2_n,led3_n); input clk,res_n;input sw1_n,sw2_n,sw3_n;output led1_n,led2_n,led3_n; reg[2:0] key_res;always @(posedge clk or negedge res_n)if(!re
    leomeng FPGA/CPLD
    新型手机电源管理芯片
    工作良好的电源管理电路是手机正常工作的基础。如果电源管理电路能够做到省电、高效、多功能而占用很小面积的电路板,就有可能使手机做得小巧而工作时间很长,理光(RICOH)新型的手机电源管理芯片R5313B正是这样一款专用芯片。R5313B的构成R5313B采用CMOS制程,CSP封装,有48只引脚,尺寸仅5×5×1.05mm3,它蕴含了手机内所需的电源管理的几乎所有功能(参见图1):有九路LDO,其中
    zbz0529 电源技术
    at89s5x isp下载线
    我做了一个at89s5x下载线,原理图见http://www.mcu123.com/new/Article_Show.asp?ArticleID=3,下载软件为atmel 公司下载的,可是,我做的下载线在我的电脑上却不能用,在别人的电脑上却可以别人的电脑是p4,xp操作系统,我的电脑是p3,xp操作系统,试了装一下2000的,也不行,试了设置电脑bios 中的并口设置,ecp,epp,normal
    nanaless44 嵌入式系统
    功率放大电路
    在这个功率放大电路中,输入信号小于1V时,波形正常稳定,大于1V时出现于正常所要求波形等频率,而且随着输入增大而增大,到达7v时,两个波形和在一起。匹配电阻一直再换,这个问题困惑我两天了,此电路需要一定的实战经验。求高手帮忙,欢迎大家讨论
    开窍的木偶 模拟电子
    为什么负载接200欧保险丝容易断
    在做实验的时候,发生保险丝断的比较多,请问是什么原因哟
    吕成丽 电源技术

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved