• 本课程为精品课,您可以登录eeworld继续观看:
  • CHAPTER 8 ARTICLES 800 – 840
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    假期一打开论坛,就是那个东方鸿运的链接。。。
    国庆当天好像根本连不上了接下来的几天一打开,先是跳到东方鸿运那个垃圾网站统统关闭之后再次打开,然后是挂着那个垃圾网站广告的论坛,和我以前发帖一样的。。。看来么有根本解决啊论坛是要加大人手了要不然老被劫持,也不好啊
    wgsxsm 聊聊、笑笑、闹闹
    上海-美资-RF Engineer
    上海美资企业招聘射频工程师2位,2年以上相关工作经验(无线、天线行业)。有想了解的可以站内短我,与我取得联系,谢谢!
    cathylu0715 求职招聘
    关于变化线宽的问题
    我要对一个0.8mm间距的BGA芯片布线,在芯片引脚间走线线宽取为5mil,然后引到芯片外面以后变线宽为10mil,请问这样变化线宽对信号会产生影响吗?
    ye9165 PCB设计
    TL431导通时压降的问题
    [size=14px]如图,当Vout在3.0V和3.5V切换时,S_RX电压会不会在Vout和0V跳变?即当Vref超过1.24V,TLV341导通时,S_RX会降到接近0V吗?[/size]
    tanchengfang 模拟电子
    有没有好的办法实现大幅度降频?!
    是典型的高速处理器与慢速外设之间的通信问题,我的设想是尽可能减少硬件而实现通信.现在DSP的频率为40MHz,还可以降些下来,但是不能降得过低,最好是不降,因为还要与别的DSP通信.而慢速外设的频率只有100KHz.相差实在太远,不知道有没有折衷的办法既能实现通信又可以最大限度的保障DSP的频率?这个问题对我来说比较棘手,基本上没有好的解决方法.不知道哪位有,请赐教!
    emailli 模拟与混合信号
    PADS的封装更新问题
    软件版本PADS9.54层板,orcad的原理图问题描述,自己制作的一个封装,在库中只有一个名字,导入到两个不同的PCB中,层显示出现差异。在附件的test.pcb中,如下图所示,该封装放在底层,焊盘显示正常,但是在顶层的时候是这样的设定的方形焊盘不见了。直接从PCB文件进入edit decal,会发现方形焊盘出现在第一二层。另外还有一个文件WIFI_USART1.pcb。也有用到该封装,也是4层
    麻袋 PCB设计

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved