• 本课程为精品课,您可以登录eeworld继续观看:
  • LIVE PARTS GUARDED AGAINST ACCIDENTAL CONTACT - 110.27(A)
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    U-boot移植记录
    [size=4]1)安装Cygwin[/size][size=4][/size][size=4]开始选择了一部分安装,结果却没有make程序,重装全部,OK [/size][size=4]添加Cygwin/bin到Path变量[/size][size=4][/size][size=4]2)安装Toolchains [/size][size=4]装完后添加cygwin/armtools/bin到pa
    fish001 微控制器 MCU
    到手的raspberry pi pico点灯一波
    pico到手,用mpy点了下灯,然后利用133M主频 再来点下呼吸灯,然后默默放入盒子,垫着吃灰。
    RCSN 国产芯片交流
    Pending address 怎么解决
    网关通过串口接收到上位机发出的数据包,网关要将此数据包发给路由子节点,但是一直发不下去,抓包时网关提示pending address,不知道怎么解决,求助!!!!
    zhaoElec 无线连接
    简化的6通道串行通讯板怎么设计?
    [color=#000000][font=宋体]以下设计题中,主[/font][font=Times New Roman]CPU[/font][font=宋体]芯片均采用[/font][font=Times New Roman]ATMega128L-8AU[/font][font=宋体],供电电源为[/font][font=Times New Roman]12V DC[/font][font=宋体
    tongyuan2007 单片机
    Xilinx FPGA & MATLAB SYSTEM GENERATOR FIR COMPILOR 调通了
    基于MATLAB SYSTEM GENERATOR 的FIR滤波器终于调通了,模型如下:参数如下:输出波形如下图所示:上图中,第一个波形是待滤波的波形,第二个是FIR数字滤波器的输出波形,第三个是MATLAB自带的滤波器。然而,上述结果有个问题未解决,如上图所示,第二个波形的峰值应该与第三个相同的,都应该为1。但实际输出,波形2的峰值却大于1,这个是为什么呢???
    huiyanhuishi FPGA/CPLD
    低成本隔离式 3.3-V 到 5-V DC DC 转换器的分立设计
    隔离式 3.3-V 到 5-V 转换器通常用于远距离数据传输网络,这种网络中总线节点控制器由一个 3.3-V 电源工作以节省电力,而总线电压为 5V,以在远距离传输过程中保持信号完整性并提供高驱动能力。尽管市场上已经有了 3.3-V 到5-V 转换的隔离式 DC/DC 转换器组件,但集成的 3.3V 到 5-V 转换器仍然很难找到。即使找到,这些特定的转换器(特别是那些具有稳定输出的转换器)通常都
    qin552011373 ADI 工业技术

    推荐内容

    热门视频更多

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved