• 本课程为精品课,您可以登录eeworld继续观看:
  • UNDER SINGLE MANAGEMENT - 225.32, Ex. 1
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    bluetooth驱动的加载问题
    现在我的系统启动时,就会自动加载蓝牙驱动程序,但是我想在系统启动时不加载蓝牙驱动程序btd.dll,而是通过应用程序来加载这个驱动程序,要怎么做呢?急等中……
    shen2089 嵌入式系统
    基于GPRS的ARM7嵌入式单片机视频报警系统
    利用以单片机应用系统为中心的小型嵌入式设备进行数据采集,并通过网络有效传输数据,已成为数据采集领域的研究焦点。由于嵌入式单片机系统集单片机和嵌入式系统为一体,因此嵌入式单片机系统广泛应用于那些对实时性、高速性和智能性要求很高的应用领域。目前计算机图像处理系统多为CCD摄像头+视频卡+计算机的工作模式,且结构复杂、成本高、体积庞大,受计算机操作系统的限制,图像处理实时性差。针对传统的图像采集系统的缺
    yuandayuan6999 单片机
    用TPS61086 做5V升12V 升压电路 后一级接触摸电路
    [size=14px]用TPS61086做了一块5N升12V的升压电路后一级是升压12V后接的一块触摸电路[/size][size=14px]现在情况如下:[/size][size=14px]用A电源(直流电源)触摸很灵敏[/size][size=14px]用B电源(直流电源) 触摸很迟钝,如果将 手放到电源的正负极后 ,后一级的触摸非常灵敏[/size][size=14px]求各位解决!!![/
    fangfang120 模拟与混合信号
    MC39i GPRS Modem登录CMNET失败求救
    各位大侠请施援手,我用的是MCU控制MC39I拨号CMNET,进行LCP协商没问题,但每次做PAP认证时,传给ISP的User和Password(均为空)之后,就收不到ISP的半点反应,过一会儿后,就收到ISP的链路中断Request,然后链路中断。帮忙分析一下问题所在。
    xioajinglchy 嵌入式系统
    【国民技术N32WB452测评】+Bootloader-IAP升级
    Bootloader-IAP升级简介要学习和使用蓝牙就需要先了解IAP升级,因为蓝牙分为boot和a下载boot程序可以使用keil下载,文件说明app程序下载使用的是串口iap的方式。Iap升级具体操作可以参考N32G45X_FR_WB系列芯片IAP升级应用笔记_V1.0.Pdf文件.Bootloader程序官方有提供串口iap升级的代码和介绍,但实际是n32G45的程序,所以需要进行一下底层程
    小火苗 无线连接
    大家看看这是怎么回事
    我最近开始用430单片机来开发东西。芯片是MSP430F425,软件是AQ430,下载程序时出现如下提示:.....Erasing Info MemoryDoneErasing Main MemoryDoneProgramming Main MemoryError writing segment at address 0x8000Error Programming Main Memory不知是什么
    shuohua 微控制器 MCU

    推荐内容

    热门视频更多

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved