• 本课程为精品课,您可以登录eeworld继续观看:
  • WARNING SIGNS - 110.27(C)
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    基于RL78/G14的四轴飞行主控(改造四轴飞行玩具)
    用RL78/G14改造四轴飞行玩具,增加一些功能,同时可以尝试控制用在其它四轴飞行器。
    fennyk 瑞萨电子MCU
    【平头哥Sipeed LicheeRV 86 Panel测评】II. GPIO管脚引出,RGB三色LED闪烁
    [i=s] 本帖最后由 zhang1gong 于 2022-3-15 11:28 编辑 [/i]1 核心板LED点亮LicheeRV教程提供了核心板上的LED点亮教程。LED点亮或闪烁往往是广泛应用于自动控制的嵌入式系统运行的第一个试验程序,如同一般在桌面系统上学习编程语言运行的第一个程序:Hello, world!。我是第一次在Linux系统下运行点灯程序,感觉和在裸机上用c或汇编编程完全不同:
    zhang1gong 国产芯片交流
    【MM32 eMiniBoard测评】+彩色OLED屏的显示驱动
    前面介绍了双色OLED屏的显示,那MM32 eMiniBoard开发板是否能驱动彩色OLED屏呢?答案是肯定的,其显示效果见图1和图2所示。图1 字符串及汉字显示图2 图标显示有别于I2C接口的双色屏,彩色屏所采用的接口是SPI,故要比双色屏占用更多的I/O口。那使用哪些引脚呢?这里OLED屏与MCU的连接关系为:SCK --PB13 CLMISO--PB14 SDAMOSI--PB15 RSTS
    jinglixixi 国产芯片交流
    EEWORLD大学堂----Atmel CryptoAuthentication- 安全保护 · 稳固收益( 二 )
    Atmel CryptoAuthentication- 安全保护 · 稳固收益( 二 ):https://training.eeworld.com.cn/course/424?Atmel提供了业内最丰富的硬件验证和加密器件选择。目前,产品组合包含三部分,其余部分尚在开发中。Atmel的 CryptoAuthentication 器件能帮助确认硬件和软件产品确实存在,这是验证的关键所在。器件采用极小
    dongcuipin 聊聊、笑笑、闹闹
    运放的选择
    我想放大一个传感器输出的一点几幅(接近2v)的电压信号,确切地说是跟随或者缩小,不知道该选择什么样的运放,要求5v单[color=#0000ff]电源[/color]供电的,之前用了lm358,输入加了2.5v的偏置,结果输出最大只能到3.7v,lm358的数据手册上写的output swing 是5mv-20mv,意思不是最大能到4.995v或者4.98v吗?为什么输出到3.7v就会停止呢?现在
    liuyinuo_2012 模拟电子
    重传:28027 DSP LaunchPad及扩展板
    [i=s] 本帖最后由 平湖秋月 于 2014-6-3 14:31 编辑 [/i]把我们实验室在28027 DSP LaunchPad及扩展板所做的实验上传几张,这些实验还是初步实验,程序待进一步改进,修改再上传,
    平湖秋月 微控制器 MCU

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved