• 本课程为精品课,您可以登录eeworld继续观看:
  • PURPOSE OF NFPA 70B
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    本人用过的TMS320F28027最小系统板
    本人做毕业设计时用的,不怎么好看,但也没有什么问题。
    yuejunwei1989 微控制器 MCU
    linux 文件系统挂载点
    media,mnt这两目录挂载文件系统有什么不同,挂在media下的能挂载在mnt下吗?除了这两目录,文件系统还能挂在其它目录下吗?如果不能那又是为什么呢?
    cpg5108 Linux开发
    SEED-EXP430F5529用IAR通过eZ400-FET下载程序问题。
    各位好;1/ 收到SEED-EXP430F5529班子后,分别将SW1拨到LDO或者eZ430端,用USB供电,程序都能跑起来,屏幕显示、程序测试都正常。2/ 然后SW1拨到eZ430,在IAR中打开MSP-EXP430F5529_User_Experience,编译,通过eZ430-FET Emulator下载,程序能正常下载,但貌似没跑起来(因为我将程序菜单的字改掉了,如"S1=Enter"改
    zhangqingwen 微控制器 MCU
    【STM32 Necleo】STM32F091 Necleo Coremark 测试
    [i=s] 本帖最后由 academic 于 2015-8-30 22:35 编辑 [/i]Coremark 现在经常被用来作为微控制器或者处理器性能的评判标准,代码完全用的是 C 语言,通过运算列举,矩阵,状态机以及 CRC 等来获得完成这些运算所需要的时间,最后得到一个分数。看到网上有表示 STM32F0 的 Coremark 在 68 分,一直想亲自测试一下,看看数据是否接近,通过从 Cor
    academic stm32/stm8
    红外管无法发射数据
    [color=#222222][backcolor=rgb(238, 238, 238)][font=sans-serif]我使用的单片机是MSP430f4152,红外发射端接在P6.6(UCA0TXD),调制口接在P3.0(TA1.2)[/font][/backcolor][/color][color=#222222][backcolor=rgb(238, 238, 238)][font=san
    175192387 微控制器 MCU
    24C64的数据存储问题
    写入24C64的数据是怎么存储的?在数据地址高字节0x00,数据地址低字节0x00中写入0x89;结果读出来的为0xFF;这是什么原因?
    dageliu 单片机

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved