• 本课程为精品课,您可以登录eeworld继续观看:
  • ELECTRICAL VAULTS - 110.31(A)
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    逻辑分析仪之基本操作
    [font=Tahoma][size=3]1.非同步模式(Asynchronous Mode)非同步模式又称为“时序分析”,它在屏幕上显示波形的方式和示波器十分相似。与示波器不同的是:a. 示波器只有2~4个信道,但逻辑分析仪却有8~200多个信道;b. 另一个不同点是,逻辑分析仪将待测信号记录为一连串的“1”(高)与“0”(低)。若在取样时刻波形的位超过分析仪预设的电压临界值(电压门限)时,仪器
    liuyong1989 电源技术
    大神帮忙,固件升级包中的BIN文件如何修改
    有个考勤机需要升级,但被序列号写死了,升级包中的.BIN文件可以通过重新命名成RAR文件,查看可以看到是由三个文件夹组成。其中一个有个文档有序列号,请大神帮忙,看如何修改保存。上面那种方法只能查看,保存又是原样。BIN文件不能用虚拟光驱打开。大家有何办法,万分感谢!!
    天天向上612 嵌入式系统
    基于LM3Sl图形驱动库开发之基本图形和图像的绘制
    基本图形和图像的绘制上次,我和大家一起分享了如何为ti的图形驱动库编写底层驱动函数。现在让我们来看一下如果使用ti提供的库来绘制最基本的字符图形,图形和图像。也就是我说的图形驱动库的第二层:图形基元层。首先,在mian函数文件中我们要包含grlib.h这个头文件。在这个头文件里定义了一些图形绘制所需要的最基本的一些数据结构和一些宏函数。同时也有对图形绘制函数的声明。同时定义一个全局的结构体:tCo
    zhengjiewen 微控制器 MCU
    有没有做Embedded controller的同行?
    如题. qq群:91037828
    zhouxinsee 嵌入式系统
    采用“系列优先”的方法进行运算放大器设计
    作者:Hayden Hast系统工程师当我第一次光顾德克萨斯的一家烧烤店时,菜单上各式各样的肉让我感到非常惊讶,以至于我不知道要选哪一种。但幸运的是,烧烤店提供了三种肉的拼盘,因而我就可以尝一下不同种类的样品肉。其实,寻找运算放大器(op amp)的设计工程师也可以有很多选择。另外,随着如今生产周期不断缩短,您需要快速做出决定。选择了错误的运算放大器可能会耗费时间和金钱。TI的多功能运算放大器组合
    alan000345 TI技术论坛
    【Altera soc 体验之旅】+基于自组网的无线路由设计在FPGA-SOC上的实现(2)
    [align=center][size=14px]FPGA软件部分之中频设计之DU[/size][size=14px]C设计[/size][/align][align=center][align=left]DUC子模块实现了低速率基带信号到高速率多载波中频信号的处理过程,DUC通常需要完成脉冲成型(Pulse Shaping),内插滤波,然后将各载波复数调制到对应频点后完成载波叠加,以便于经DAC
    muhan9 FPGA/CPLD

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved