• 本课程为精品课,您可以登录eeworld继续观看:
  • APPLYING OSHA 1910, SUBPART R
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    老外写的《穿越者手册》
    [color=#555555]穿越是很多网络小说的主题,主角穿越回去,然后XXXXXX(省略XX字)。现在老外写了一本《[/color][font=Microsoft Yahei, Helvetica Neue, Helvetica, Arial, sans-serif][color=#555555]The Time Traveler’s Handbook(穿越者手册[/color][/font]
    dcexpert 聊聊、笑笑、闹闹
    全国大学生电子设计竞赛获奖作品选编
    [i=s] 本帖最后由 paulhyde 于 2014-9-15 02:59 编辑 [/i]:hug:
    lifei0_0 电子竞赛
    电子应用入门知识(四)
    [table][tr][td][/td][/tr][/table]四、稳压二极管稳压二极管在电路中常用“ZD”加数字表示,如:ZD5表示编号为5的稳压管。1、稳压二极管的稳压原理:稳压二极管的特点就是击穿后,其两端的电压基本保持不变。这样,当把稳压管接入电路以后,若由于电源电压发生波动,或其它原因造成电路中各点电压变动时,负载两端的电压将基本保持不变。2、故障特点:稳压二极管的故障主要表现在开路、
    xuenan1981 单片机
    type-c usb接口
    求type-c usb接口封装,谢谢各位大佬
    begin权丿 PCB设计
    请问触发器的RN和SN是电平触发还是边沿触发啊
    请教个问题,请问触发器的RN和SN是电平触发还是边沿触发啊,问别人说是电平触发的。always @ (posedge clk or posedge rst)beginif (rst) ..........else .........end假如在电路刚开始工作时没有clk,并且rst信号在刚开始是一直为高(没有上升沿),那么第一个if语句还会被执行到吗?谢谢啦
    eeleader FPGA/CPLD
    目标机的硬盘引导vxWroks后能否使用Target Sever
    本人采用由目标机的硬盘引导vxWroks,并配置了目标机与主机的通讯网口,其DEFAULT_BOOT_LINE结构如下;"ata=0,0(0,0)OFFICEPC:/ata0/vxWorks/Vxworks h=192.168.26.97 e=192.168.26.57 u=target pw=vxworks tn=target o=lnPci"。引导过程一切正常,ping目标机192.168.2
    Jonsen_yang 嵌入式系统

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved