• 本课程为精品课,您可以登录eeworld继续观看:
  • (a) INSULATION OR COVERING - 230.22
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    继续学习MSP430
    看来基础实在太差,到了时钟,学习进度开始放慢。输入输出的设定的确简单,只需要这通过P1DIR来设定,将相应的BIT设定成0或1就行。随LaunchPad带来的G2231只有P1,所以单片机只有8个输入/输出脚。至今还不理解的是,8个输出脚如何能进行10 Bit的AD转换?等学到那里再理解吧。基本时钟系统(BCS)看来有点复杂,按照目前十分有限的理解,MSP430单片机一共有三个时钟,一个主时钟,一
    John_sea 微控制器 MCU
    Ad hoc网络安全综述
    摘要:移动Ad [u][b]hoc[/b][/u][u][b]网络[/b][/u]是由一组自主的[u][b]无线[/b][/u]节点或终端相互合作而形成的网络,由于其[u][b]动态拓扑[/b][/u]、无线通信的特点,容易遭受各种安全威胁。从传输信道、移动节点、动态拓扑、[u][b]安全机制[/b][/u]、[u][b]路由协议[/b][/u]几方面,分析了移动Ad Hoc网络的安全弱点,然后结
    xtss 无线连接
    MSP 430f5438A 接收数据包的问题
    本人初学430.接收数据包,老是接收到最后一个,前面的被覆盖掉了吗???收到的数据用串口助手显示是EF 01 FF FF FF FF 07 00 03 00 00 0A,但是从缓存器里取出来的只有一位0A,难道是我程序错了,还是缓存器里的值不能用循环来取,在线急等do /////////////////////////////do的内容///////////////////////////////
    MLL123 微控制器 MCU
    请问 有没有带MAC地址的以太网芯片 配合单片机使用 ?
    [i=s] 本帖最后由 dianhang 于 2018-5-10 14:42 编辑 [/i][color=#666666][font=Tahoma, Verdana, Arial, ][size=14px]请问 有没有带固定MAC地址的以太网芯片 配合单片机使用 ?[/size][/font][/color]
    dianhang stm32/stm8
    关于BBB开发环境搭建的疑惑
    论坛各位大大好,新人再次求助,关于BBB开发环境的搭建。先在此说明一下个人的情况,本人完全是业余爱好者,之前的开发经验是STM32F104和STM32F407,平台是win7+MDK,都是裸机开发,没有玩过系统。现在想更进一步,所以买了BBB来玩。最近泡了论坛很多大大的帖子,感谢各位大大的无私贡献,让我初步有所了解,但是现在还是有不明白的地方请教。先说说我现在的平台i5笔记本+ubuntu14.0
    adaphoto DSP 与 ARM 处理器
    毕设求助
    大神求助,这个元件用AD怎么画啊?
    真龙破天 PCB设计

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved