• 本课程为精品课,您可以登录eeworld继续观看:
  • (a) MEANS OF ATTACHMENT - 230.27
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    今天很烦,想找人说说话.路过的请进来坐坐...
    当时进公司应聘VXWORKS 软件开发的,进来后老板给了我一个挺棘手的项目----一个拖了客户一年半的项目,经过N个人的手,资料又不全的项目,当时也很迷茫,却又不想放弃,所以就坚持了下来,好在后来按老板的要求做好了,完成了.本以为这样就可以做有关VXWORKS的项目了,但是老板又安排我做WINDOWS下的界面开发,好,做就做吧----公司主要是做嵌入式开发的,所以没有人做WINDOWS 下的开发.
    dcyeahnet 嵌入式系统
    求大神指导!如何将FATFS一直到SD卡上??急!!!
    RT,板子F5528的芯片,模拟IO口SPI模式通信SD,小弟目前编了个SD卡的驱动,想在SD卡上完成FATFS 的系统植入,并能够在PC上显示出SD卡中的数据。FATFS用的是0.9版本的,看了网友其他人做的SD卡数据读写,里面都有diskio.c,而这版没有。。。。不知需不需要编????看了ff.c中的一堆函数,不知如何用啊??是在main中调用吗??可是函数本身的定义有问题啊,FRESULT
    shenmiao0330 微控制器 MCU
    固态继电器的选型注意事项
    用户在使用固态继电器时应用条件,注意固态继电器性能参数和负载能力合理选择,下面从四个方面介绍:固态继电器在使用过程中应注意的事项:1、负载类型,输出电流和浪涌电流使用中流过继电器输出端的稳态电流不得超过产品详细规范规定的相应温度下的额定输出电流,可能出现在浪涌电流不得超过继电器的过负载能力,用户在选用固体继电器时,必须考虑继电器在保证稳态工作的前提下,能够承受这个浪涌电流。下面给出考虑负载浪涌电流
    fish001 模拟与混合信号
    新手刚刚学会Altium Designer ,请各位大神指教
    刚刚学会AD,就画了一板子(没有技巧,就是把该连的先连了起来),但是我不知道怎样评判一个板子的好坏,所以有非常多的错误,谢谢各位大神指教:congratulate:
    王一天 PCB设计
    M3例程大全
    [i=s] 本帖最后由 paulhyde 于 2014-9-15 03:13 编辑 [/i]M3的通用例子程序。要的都拿去
    subry 电子竞赛
    MOTOROLA 32位单片机选型指南
    M683XX系列单片机主要特性列表(一)型号 工作频率(MHz) 功耗(W) 工作电压(V) I/O最大工作电压(V) 存储器控制 内部Flash 内部RAM DMA控制 A/D转换器MC68302 25,33,20,16 0.468 3.3,5 5 - - - yes -MC68306 20,16 - 5 DRAM - No -MC68331 25,20,16 - - -MC68332 25,2
    rain 单片机

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved