• 本课程为精品课,您可以登录eeworld继续观看:
  • (b) OVERALL PROTECTION
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    射频计算公式 备份一个
    空了 时间忘记的时候 回来看看
    btty038 无线连接
    嵌入式2410实验平台ZLG7290的44键盘输入led数码管显示问题
    集成开发环境是ADS1.2、DNW串口超级终端由开发板里的4x4键盘输入,在8位LED数码管上显示数字按下键盘输入第一个数字时,第一个数字在第八位显示再按一次数字键输入第二个数字,第一个数字移到了第七个位,第二个输入的数字就显示在第八位反正就是最后一次输入的数字就显示在第八位,倒数第二个输入的的在第七位,以此类推有程序就最好了
    忧乐游子 嵌入式系统
    stm8大程序不进中断
    stm8s208时 多加了几个__CONST 就不进中断 ,这是怎么回事?
    xunmengtaxiang stm32/stm8
    最新的MEMS技术可实现便携式高清投影显示的创新型应用
    [align=left][color=#000]想象一下,你的汽车遮阳板上夹着一个后装的平视显示(HUD)产品,它能够将行驶方向投射到挡风玻璃上。再试想一下,你的一台[color=rgb(205, 23, 31)][url=http://e2e.ti.com/blogs_/b/enlightened/archive/2015/07/01/create-up-to-70-inch-1080p-scr
    maylove DSP 与 ARM 处理器
    关于背光不能自动关闭的问题
    我在控制面板中设置了 1分钟自动关闭背光, 但是始终没有关闭背光。背光驱动支持电源管理,支持IOCTL_POWER_CAPABILITIES,IOCTL_POWER_QUERY,IOCTL_POWER_SET,IOCTL_POWER_GET。系统启动时 BKL_IOControl 函数会收到一个 IOCTL 请求,然后就再也收不到任何 IOCTL 请求了。所以导致背光驱动收不到系统发出的关闭背光的
    bluecrane 嵌入式系统
    HT24LC16 不能写入数据!
    [i=s] 本帖最后由 iirqc 于 2015-4-30 17:24 编辑 [/i]大家好,最近我在用430单片机读写HT24LC16时,遇到一个问题,希望大家帮我分析下,谢谢!在往HT24LC16中写数据时,先写设备地址,成功,再写字节地址成功,成功是指有ACK返回信号,但接着往里写数据时就没有ACK返回信号了,不知道问题出在哪了,大家帮我分析下吧!我又发现,当字节地址是0x0,0x2,0x4
    iirqc 微控制器 MCU

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved