• 本课程为精品课,您可以登录eeworld继续观看:
  • EXAMINATION, INSTALLATION, AND USE OF EQUIPMENT
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    请教各位大侠关于2812电源的问题
    2812的I/O 电源分为模拟电源和数字电源,ADC 也分为模拟电源与数字电源,那位老大能给解释一下啊
    zengmaoyi 微控制器 MCU
    谈谈怎样提升SPI读写SD卡的速度
    不知道哪位有经验,谈谈怎样可以提升SPI读写SD卡的速度?现在已经把时钟设置到最大了,但是速度还是不理想,没有具体测试能达到多少,但是感觉非常忙。希望高手没不吝赐教。。。。。。
    zhaojun_xf 单片机
    可测型设计(2)
    接着发,上午的续
    luofeng201 嵌入式系统
    有关JTAG 与 I/O 功能之间的 MSP430 引脚复用
    [size=4]四个引脚 P1.7 - P1.4 在 20 与 28 引脚 MSP430F1xx 器件上均同时具有 I/O 与 JTAG 功能。这些引脚的默认功能是,当器件通电时具有 I/O 功能。当测试引脚拉高时,则将这些引脚选为 JTAG。当使用交互式系统内调试程序时,这些器件的 FET 会将这些引脚处于 JTAG 模式下。有关在使用调试程序时从 JTAG 模式发布引脚的信息,或参阅《FET
    Aguilera 微控制器 MCU
    R7F0C809 RESET设置为输入端口 选项字节设置
    [i=s] 本帖最后由 bkn1860 于 2015-8-26 14:14 编辑 [/i][b]R7F0C809RESET[font=宋体]设置为输入端口[/font][/b][align=left]当需要把R7F0C809的RESET端口当做输入口使用的时候,需要将PORTSELB设置为0,PORTSELB默认是1,R7F0C809规格书的第十八章介绍了选项字节的内容具体设置方法如下:[/ali
    bkn1860 瑞萨电子MCU
    关于电源接地的问题
    我想做一个放大器 输入信号几mv到3V左右的正弦信号,我想问一下,输入信号的地线 能否与为放大器提供电能源的电源的地线接在一起??
    wuli1314 模拟电子

    推荐内容

    热门视频更多

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved