• 本课程为精品课,您可以登录eeworld继续观看:
  • (a) GROUND-FAULT PROTECTION OF EQUIPMENT - 230.95
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    关于eZ430-RF2500在智能车数据采集中的应用(一)
    3月25日拿到开发最后一套的开发套件,拿来后和大多数童鞋一样实验了一下demo,成功了然后入手其他硬件平台的设计,毕竟有了可以产生数据的平台,传输模块才有用。申请这个模块其实也是在为我的毕业设计做工作,因为我的毕业设计题目就是基于电磁式传感器的智能小车的设计。基本类似于飞思卡尔智能车设计。下面上图1 这是智能车将要跑的跑道。上面那个12864上的东西是产生一个20Khz的交变直流信号的。用于产生道
    k410533234 微控制器 MCU
    S3C2440 SPI接收问题请教
    S3C2440 SPI接收问题请教, 程序代码如下所示. 我通过示波器能够抓到MISO,MOSI的正确波形,说明数据发送和接收都是正确的,可就是2440寄存器SPRDAT0没有数值,始终是0.各位大侠估计什么原因?ARM MISO管脚显示信号都是正确的,相应接收寄存器却没有数值?SPI_CtrlBlk.pSPIReg->SPTDAT0 = 0xaa;RETAILMSG(1, (TEXT("SPI_
    cclinyes 嵌入式系统
    关于remote tools
    起源于CETK工具连不上。看到论坛上googleman讨论的CETK的用法,我尝试用activeSync连接CETK,发现有问题。报错:ActiveSync report error: unable to load device side components。现在发现问题更普遍了:在vs2005的taget菜单中的remote tools 和 开始-》vs2005 子菜单中的remote too
    snowingsuning 嵌入式系统
    稳定模拟表头读数的机电阻尼法
    在交付动圈表头之前,制造厂用一根连线将表头的端子短路,以产生有效的电磁阻尼,防止运输中发生的外界机械振动和冲击。本设计实例将相同原理用于正常工作条件下的模拟表头。将一只表头连接到有低内阻的电压源,即施加电磁阻尼,使表头的读数更稳定。在移动系统或便携系统应用中增加对外界振动和冲击的防护能力非常重要,尤其是对车载设备。  举例来说,假设您的应用需要测量0~10V 的电源(图 1)。手头有一块满量程额定
    fighting 模拟电子
    视频监控系统遭受雷击损害的主要原因
    Ⅰ.直击雷:雷电直接击在露天的摄像机上造成设备损坏或雷电直接击在架空线缆上造成线缆损毁。这种雷击方式造成的破坏最严重,但出现机率比较小。Ⅱ.感应雷:又称二次雷,它分为电磁感应和静电感应。当附近区域有雷击闪落时,在雷击落实通道周围会产生强大的瞬变电磁场。处在电磁场中的监控设备和传输线路会感应出较大的电动势,这种现象叫电磁感应;当有带电的雷云出现时,在雷云下面的建筑物和传输线路上会感应出与雷云相反的电
    xyh_521 工业自动化与控制
    DSP2812 片上AD采样频率不对,请教
    [b]DSP2812 片上AD采样频率不对,请教[/b][color=rgb(0, 0, 0)][font=Helvetica, Arial, sans-serif]单通道采样时,adcinit()设置为:1、用EVA T1计时器周期中断产生AD启动信号;采样率1M2、单序列发生器,顺序采样3、AD时钟频率设置KPS值、采样窗口值挨个全试过,就是不对调到最后发现个现象,2K、4K、6K...40K
    vselite DSP 与 ARM 处理器

    推荐内容

    热门视频更多

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved