• 本课程为精品课,您可以登录eeworld继续观看:
  • DEPTH OF WORKING SPACE - 110.26(A)(1) AND TABLE 110.26(A)(1), CONDITION 2​​​​​​​
  • 登录
课程介绍
相关标签: 电子系统
James Stallcup, Sr. has reinvented Designing Electrical Systems that catapulted him to the forefront of the electrical industry as a prominent author,  effective instructor, and respected authority on the application of the National Electrical Code®.

Everyone from engineers, electrical contractors, inspectors, electricians, and instructors of the Code have anticipated the arrival of this book.  The large workbook format allows a masterful blending of valuable Design Tips, NEC Loops, Examples, Quick Calcs,  and effective illustrations with authoritative Code references. Because of the abundant amount of detailed information included, it is the most comprehensive design book of its kind.    

Stallcup’s® Designing Electrical Systems explains the purpose of the National Electrical Code (NEC) and more particularly, its use as it applies to the design and installation of electrical wiring systems and equipment.

While the substance of design is found in the National Electrical Code, the art of the design is found in the applicability of that same National Electrical Code. With the advancement of today’s technology and ever-increasing liabilities, effective electrical design must now, more than ever, consider the use of certified products, energy conservation, economy vs. quality, anticipated load growth, local codes, special applications of electrical equipment, and the use and interpretation of the National Fire Protection Association (NFPA) and the Institute of Electrical and Electronics Engineers (IEEE) standards that relate to special areas, etc. For better understanding and interpretation of these advancements, considerable effort has been made by the author to condense the more complicated rules pertaining to the design, installation, and selection of wiring methods and equipment.

For the convenience of the reader, Designing Electrical Systems not only contains discussions and explanations of Code rules, but also includes detailed illustrations and sample calculations that will help tremendously in understanding and becoming proficient in the application of the National Electrical Code. Designing Electrical Systems also points out common industry problems and shows in detail the proper procedures and techniques to use in order to ensure proper code compliance. Design Tips, Calculation Tips, and guidelines for "rule of thumb" methods for instances where a fast and approximate design answer is needed are also provided. 

In order for the reader to measure his or her design skills or to prepare for a maintenance, journeyman or master electrician examination or for inspector certification, an ample number of quizzes, tests, and final examinations have been included.

With the wealth of information found in this book, it will make a valuable addition to the library of any consultant, serve as an excellent reference to the seasoned professional, and also provide valuable introductory material to the beginner.
显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    求组 急急急急~!!!!!!!!!!!!
    用8051单片机设计一交通信号灯模拟控制系统,晶振采用12MHz,具体要求:正常情况下,A、B道(A、B道交叉组成十字路口,A是主道,B是支道)轮流放行:1:A道放行10s: (1)用定时器实现0.5s延时()(2)用8段数码管来显示10s延时,如用4个数码管显示开始为“A10B10”,延时一秒后,下一个显示为“A9B9”。(3)同时用16*16点阵来显示通行的图标“A->”,用2个8*8点阵显示
    yzb19860411 嵌入式系统
    Fatal Error[Pe1696]: cannot open source file "12864.h"
    [i=s] 本帖最后由 paulhyde 于 2014-9-15 03:17 编辑 [/i]各位大神能教我如何将外来文件添加进工程中而不出现Fatal Error[Pe1696]: cannot open source file "12864.h" E:\MSP430G2553\AD for 12864\main.c 3 这类的错误呢?
    卡西莫多眼泪 电子竞赛
    RS-232串口通讯协议解析
    RS-232-C串口通讯协议解析串行通信接口标准经过使用和发展,目前已经有几种。但都是在RS-232标准的基础上经过改进而形成的。所以,以RS-232C为主来讨论。在讨论RS-232C接口标准的内容之前,先说明两点.首先,RS-232-C标准最初是远程通信连接数据终端设备DTE(Data Terminal Equipment)与数据通信设备DCE(Data Communication Equipm
    tiankai001 单片机
    功能该如何来实现?
    这两个周一直在思考自己最初始制定的功能该如何来实现。第一个功能:通过骨振动传感器LIS25BA检测笔尖移动的方向和距离,实现对笔尖移动轨迹的记录。如何来记录笔尖移动的方向和距离。对于方向,感觉骨振动传感器好像不擅长这个。3轴加速度能测量出来往哪个方向移动,并且移动了多长距离吗?对于正方向如果能的话,那么对于曲线该如何做?对于内嵌FSM(有限状态机)和MLC(机器学习内核),好像对绘画这种没有任何重
    poponianhua ST MEMS传感器创意设计大赛专区
    ARM Cortex-M3中断跳转过程
    在学习CM3的时候,仔细学习了CM3的中断跳转过程,发现嵌入式的MCU在这一块基本上是一样的,当然不同架构的MCU也有自己的特性。我来介绍下CM3的中断跳转过程,首先假设中断发生,CM3内核开始响应中断,由于不同厂家的CM3可能略有区别,但CM3的内核肯定是一样的,所以我们在这个前提下开始讨论,暂时把中断屏蔽位,标志位之类的东西放在一边。现在介绍中断响应的过程:1、压栈。从这一点来讲几乎所有的处理
    wstt 微控制器 MCU
    基于LabVIEW和声卡的数据采集系统
    基于LabVIEW和声卡的数据采集系统
    安_然 测试/测量

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved