• 本课程为精品课,您可以登录eeworld继续观看:
  • MINIMUM WIRE-BENDING SPACE - 408.3(G)
  • 登录
课程介绍
相关标签: 电子系统
Switchboards are designed with busbars for fuses or circuit breakers that are used for protecting and supplying feeders and branch circuits. Panelboards are designed with a permanently installed main circuit breaker or single set of fuses for disconnecting the number of circuit breakers or fuseholders installed to protect and supply feeders or branch circuits.

SUPPORT AND ARRANGEMENT OF BUSBARS AND CONDUCTORS
408.3

Busbars shall be held firmly in place in the enclosure and shall be arranged in such a way to allow adequate space for conductors to be terminated. Busbars shall be sized with enough capacity to handle the normal currents in amps of the electrical system. In addition, they shall carry safely any type of short-circuit or ground-fault condition.

CONDUCTORS AND BUSBARS ON A SWITCHBOARD OR PANELBOARD
408.3(A)

Conductors and busbars on a switchboard, panelboard, or control board shall be so located as to be free from physical damage. Service sections of such boards shall be separated from the other electrical components. These components shall be properly secured in an approved manner. 

Note, conductors entering a certain section shall terminate in such section, except where it is not practical for control, interconnecting conductors, or other conditions of use.

OVERHEATING AND INDUCTIVE HEATING
408.3(B)

The arrangement of busbars and conductors shall be such as to avoid overheating due to inductive effects. The inductive effect of each conductor is neutralized when grouping all conductors together. To accomplish the minimizing of heating effects, the ungrounded (phase) conductors, grounded (neutral) conductors, and equipment grounding conductors, where used, shall be in the same enclosure, raceway, cable, cord, etc. (See Figure 7-1)

显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    uCOS II在XP系统下的编译问题
    uCOS II在XP系统下的编译问题我准备学嵌入式,刚刚开始看μCOSII中文教程,并且下载了源代码V2.52的安装版本。书本已经看完,有一定收获,代码也差不多看完了。现在想自己在XP系统下编译实现,却遇到了麻烦。书中 C/OS-II在80x86上的移植 章节提示说用Borland C/C++ V3.1和Borland Turbo Assembler汇编器进行这些工作,我在网上下载了几个编译器,似
    bluejb119 实时操作系统RTOS
    TMS320F28035学习
    [p=35, null, left][font=&quot][size=3][color=#000000]1.调用TI的官方延时函数DELAY_US()的步骤,在DSP2803x_Examples.h头文件中。[/color][/size][/font][/p][p=35, null, left][font=&quot][size=3][color=#000000]使用TI定义的DELAY_US(
    Jacktang 微控制器 MCU
    chmod 755和chmod 4755的区别
    chmod 755和chmod 4755的区别chmod是Linux下设置文件权限的命令,后面的数字表示不同用户或用户组的权限。一般是三个数字:第一个数字表示文件所有者的权限第二个数字表示与文件所有者同属一个用户组的其他用户的权限第三个数字表示其它用户组的权限。权限分为三种:读(r=4),写(w=2),执行(x=1)。综合起来还有可读可执行(rx=5=4+1)、可读可写(rw=6=4+2)、可读可
    linrui0726 ARM技术
    一张电路原理图竟蕴含这么多大道理?
    一、电子电路的意义  电路图是人们为了研究和工程的需要,用约定的符号绘制的一种表示电路结构的图形。通过电路图可以知道实际电路的情况。这样,我们在分析电路时,就不必把实物翻来覆去地琢磨,而只要拿着一张图纸就可以了。在设计电路时,也可以从容地纸上或电脑上进行,确认完善后再进行实际安装,通过调试、改进,直至成功。我们更可以应用先进的计算机软件来进行电路的辅助设计,甚至进行虚拟的电路实验,大大提高工作效率
    Jacktang 模拟与混合信号
    建议以后情况不明的事别往坛子里发
    昨天,坛子里有一位坛友发了[b]《北京街头外国小伙扶摔倒中年女子遭讹诈》:[/b][url=https://bbs.eeworld.com.cn/thread-420433-1-1.html]https://bbs.eeworld.com.cn/thread-420433-1-1.html[/url]今天早晨又发现了,事实真象:[url=http://news.sina.com.cn/c/2013
    ddllxxrr 聊聊、笑笑、闹闹
    驱动程序是顺序执行的吗
    小弟学驱动有一段时间了。有一个问题一直搞不明白。驱动程序是从DriverEntry入口,然后执行各个派遣历程,这个DriverUnload是自动执行,还是等到外部叫用以后才执行。还有个问题,我在驱动中打开了一个记事本,让记录的键盘写入。我现在是在卸载历程中关闭记事本,在外部叫用以后总是要卸载驱动以后才能打开记事本。我想在写入记事本后就关闭,但是还是有点问题代码如下if(keys != 0){//写
    liao_0222 嵌入式系统

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved