• 本课程为精品课,您可以登录eeworld继续观看:
  • OVERCURRENT PROTECTION - 408.36
  • 登录
课程介绍
相关标签: 电子系统
Switchboards are designed with busbars for fuses or circuit breakers that are used for protecting and supplying feeders and branch circuits. Panelboards are designed with a permanently installed main circuit breaker or single set of fuses for disconnecting the number of circuit breakers or fuseholders installed to protect and supply feeders or branch circuits.

SUPPORT AND ARRANGEMENT OF BUSBARS AND CONDUCTORS
408.3

Busbars shall be held firmly in place in the enclosure and shall be arranged in such a way to allow adequate space for conductors to be terminated. Busbars shall be sized with enough capacity to handle the normal currents in amps of the electrical system. In addition, they shall carry safely any type of short-circuit or ground-fault condition.

CONDUCTORS AND BUSBARS ON A SWITCHBOARD OR PANELBOARD
408.3(A)

Conductors and busbars on a switchboard, panelboard, or control board shall be so located as to be free from physical damage. Service sections of such boards shall be separated from the other electrical components. These components shall be properly secured in an approved manner. 

Note, conductors entering a certain section shall terminate in such section, except where it is not practical for control, interconnecting conductors, or other conditions of use.

OVERHEATING AND INDUCTIVE HEATING
408.3(B)

The arrangement of busbars and conductors shall be such as to avoid overheating due to inductive effects. The inductive effect of each conductor is neutralized when grouping all conductors together. To accomplish the minimizing of heating effects, the ungrounded (phase) conductors, grounded (neutral) conductors, and equipment grounding conductors, where used, shall be in the same enclosure, raceway, cable, cord, etc. (See Figure 7-1)

显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    3.3 转5V用什么芯片
    来自:电子工程师技术交流(12425841)
    不见不散 PCB设计
    【MSP430共享】基于MSP430F449的数字频率计设计
    摘 要: 本文主要介绍了MSP430F449单片机的性能特点,结合前置双模分频器SAB6456A和高速数字分频器74HC390的典型应用,给出了以MSP430F449为主控芯片的射频数字频率计的硬件设计和软件的主程序流程,设计出了一种全自动、数显的射频频率计。关键词:MSP430;捕获;射频分频;动态扫描显示技术 本文利用前置分频器SAB6456A和高速数字分频器74HC390的分频功能,结合新型
    GONGHCU 微控制器 MCU
    串口通讯问题
    pc一次向单片机发送5个字节的数,可在仿真时查看数组变量就不对,数组指针也不对,请教各位高手怎么解决?源程序如下:#includeReg52.hunsigned char inbuf1[4]; unsigned char count3;void init() {TMOD=0X20;TH1=0XFD;TL1=0XFD;SCON=0X50;TR1=1;ET0=1;REN=1;EA=1;ES=1;}vo
    eeleader 单片机
    【玩转LaunchPad】之LaunchPad开发板介绍(一)
    本系列文档特别感谢坛友wstt、david_lee、cat3902982、sugerlatu、zhangdaoyu等朋友的大力支持下,他们花费了很多时间和精力,将坛子里的资料进行了规整、总结,没有他们的付出,就不会有本教程的出炉。本教程旨在带领初学者入门,如果还需要再深入了解,可在论坛随时沟通,也可以分享自己的设计成果。:)第一部分:LaunchPad 开发板介绍大家都拿到了超级便宜的Launch
    EEWORLD社区 微控制器 MCU
    只能显示十位,无法显示个位
    数码管只能显示十位,无法显示个位,各位有闪烁现象,求高手赐教!!!void desplay(uchar k){uchar shi,ge;shi=k/10;ge=k%10;dula=1;P0=table[ge];dula=0;P0=0XFF;wela=1;P0=0xfd;wela=0;delay(10);dula=1;P0=table[shi];dula=0;P0=0XFF;wela=1;P0=0x
    wjdgj1987 单片机
    CC2540 SensorTag资料
    刚下的,分享一下,向往SensorTag快点到来[[i] 本帖最后由 568760310 于 2013-11-27 13:21 编辑 [/i]]
    568760310 无线连接

    推荐内容

    热门视频更多

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved