• 本课程为精品课,您可以登录eeworld继续观看:
  • RECEPTACLE OUTLETS FOR SMALL-APPLIANCE CIRCUITS210.52(B), 210.52(C), 210.11(C)(1), & 220.52(A)
  • 登录
课程介绍
相关标签: 电子系统
Switchboards are designed with busbars for fuses or circuit breakers that are used for protecting and supplying feeders and branch circuits. Panelboards are designed with a permanently installed main circuit breaker or single set of fuses for disconnecting the number of circuit breakers or fuseholders installed to protect and supply feeders or branch circuits.

SUPPORT AND ARRANGEMENT OF BUSBARS AND CONDUCTORS
408.3

Busbars shall be held firmly in place in the enclosure and shall be arranged in such a way to allow adequate space for conductors to be terminated. Busbars shall be sized with enough capacity to handle the normal currents in amps of the electrical system. In addition, they shall carry safely any type of short-circuit or ground-fault condition.

CONDUCTORS AND BUSBARS ON A SWITCHBOARD OR PANELBOARD
408.3(A)

Conductors and busbars on a switchboard, panelboard, or control board shall be so located as to be free from physical damage. Service sections of such boards shall be separated from the other electrical components. These components shall be properly secured in an approved manner. 

Note, conductors entering a certain section shall terminate in such section, except where it is not practical for control, interconnecting conductors, or other conditions of use.

OVERHEATING AND INDUCTIVE HEATING
408.3(B)

The arrangement of busbars and conductors shall be such as to avoid overheating due to inductive effects. The inductive effect of each conductor is neutralized when grouping all conductors together. To accomplish the minimizing of heating effects, the ungrounded (phase) conductors, grounded (neutral) conductors, and equipment grounding conductors, where used, shall be in the same enclosure, raceway, cable, cord, etc. (See Figure 7-1)

显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    i2s的驱动
    有人写过i2s的驱动吗?可以提供源码吗?
    wxchen2008 嵌入式系统
    122x32液晶1520控制器驱动程序
    用C程序编写的一小段程序参考
    rain 工业自动化与控制
    编辑框的一点小问题
    我在发帖时,光标在“所见即所得模式”里闪动,然后我用鼠标点开屏幕最底下的一个文件夹,后又点回电子工程世界编辑网页,可以看到光标仍在闪,但是输入文字却输不进去,还需要再点一下。
    linjingui 为我们提建议&公告
    stm32的远程调控
    我想做一个航模,有爱好者吗,遥控也准备自己做,请问远程遥控的编程能有谁给点建议
    润玉 ARM技术
    MPC56XX用什么开发环境啊,有免费的吗?
    MPC56XX用什么开发环境啊,有免费的吗?谢谢!
    renmingcn NXP MCU
    求助:Wince如何快速重绘窗口
    请教下,现在有两个窗口,一个主窗口A,一个弹出窗口B,按下A窗口的按钮会弹出B窗口,现在的问题是,按下按钮时显示B窗口没问题,但是抬起按钮后隐藏B窗口的时候会将B覆盖A的那部分窗口重绘,重绘的那部分会瞬间变白然后再显示出A窗口。A,B两个窗口是没关系的,独立的。
    661023 嵌入式系统

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved