• 本课程为精品课,您可以登录eeworld继续观看:
  • ACCESSIBILITY OF OVERCURRENT PROTECTION DEVICES - 240.24(A)
  • 登录
课程介绍
相关标签: 电子系统
Switchboards are designed with busbars for fuses or circuit breakers that are used for protecting and supplying feeders and branch circuits. Panelboards are designed with a permanently installed main circuit breaker or single set of fuses for disconnecting the number of circuit breakers or fuseholders installed to protect and supply feeders or branch circuits.

SUPPORT AND ARRANGEMENT OF BUSBARS AND CONDUCTORS
408.3

Busbars shall be held firmly in place in the enclosure and shall be arranged in such a way to allow adequate space for conductors to be terminated. Busbars shall be sized with enough capacity to handle the normal currents in amps of the electrical system. In addition, they shall carry safely any type of short-circuit or ground-fault condition.

CONDUCTORS AND BUSBARS ON A SWITCHBOARD OR PANELBOARD
408.3(A)

Conductors and busbars on a switchboard, panelboard, or control board shall be so located as to be free from physical damage. Service sections of such boards shall be separated from the other electrical components. These components shall be properly secured in an approved manner. 

Note, conductors entering a certain section shall terminate in such section, except where it is not practical for control, interconnecting conductors, or other conditions of use.

OVERHEATING AND INDUCTIVE HEATING
408.3(B)

The arrangement of busbars and conductors shall be such as to avoid overheating due to inductive effects. The inductive effect of each conductor is neutralized when grouping all conductors together. To accomplish the minimizing of heating effects, the ungrounded (phase) conductors, grounded (neutral) conductors, and equipment grounding conductors, where used, shall be in the same enclosure, raceway, cable, cord, etc. (See Figure 7-1)

显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    開漏引腳並聯
    請問什麼叫開漏引腳並聯結構?
    zhonghuadianzie PCB设计
    ce的串口为什么会死机
    每发送一组字符或一个字符,pc机仅能收到一个字符,而且开发板还死机,若发送不成功,开发板不死机.开发板还不能接受,一接收就死机.不知道怎么回事,请大家指点指点,是驱动程序问题还是系统程学问题还是应用程序问题?
    tianquan 嵌入式系统
    嵌入式Linux软件工程师—高级培训班
    [b][font=宋体][size=12pt][/size][/font][/b][b][font=宋体][size=15pt][url=http://www.chinaeda.cn/edu/jiuye_1.html][color=#0000ff]嵌入式[/color][/url][/size][/font][/b][b][size=15pt][url=http://bbs.chinaeda.cn
    cctv200807 求职招聘
    高分紧急求助--如何在生成cab文件时指定程序的快捷方式的参数??
    RT,如何在********_WCE4.inf文件修改[Shortcuts]节,以达到给某个程序的快捷方式添加参数的目的?在某个老外的博客上看到一种方法,于是按以下格式修改(/后面为参数):test,0,text.exe /1,%CE11% 但是生成cab文件时出错了:Error: Section [Shortcuts] shortcut "test.lnk" - there is no matc
    haian_bch 嵌入式系统
    [转]CC3200-M4+NWP电源管理功耗测试笔记
    [align=left][color=#000]Hi 这几天在研究[color=rgb(205, 23, 31)][url=http://www.ti.com.cn/product/cn/CC3200]CC3200[/url][/color]的电源管理方案,从数据手册和TRM手册以及CC3200-Power_Management_Framework中进行测试总结,整理的一份测试报告,测试数据和参考
    dontium 无线连接
    手机电视渐行渐近,我们该选谁?
    [i=s] 本帖最后由 jameswangsynnex 于 2015-3-3 20:01 编辑 [/i]最近的手机电视标准之争,似乎搞得人有些疲惫。究竟消费者想要尝个鲜,该如何做出权衡? “我国正就广播方式手机电视制定国家标准,还没有最后确定。现在已有一个行业标准,是由广电总局颁布的行标,但国标正在紧锣密鼓地制定中,”奚国华日前表示。部长的表态让手机标准之争再添迷雾。在今年6月21日召开的手机电视
    voyage620 消费电子

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved