• 本课程为精品课,您可以登录eeworld继续观看:
  • GROUNDING OF PANELBOARDS - 408.40
  • 登录
课程介绍
相关标签: 电子系统
Switchboards are designed with busbars for fuses or circuit breakers that are used for protecting and supplying feeders and branch circuits. Panelboards are designed with a permanently installed main circuit breaker or single set of fuses for disconnecting the number of circuit breakers or fuseholders installed to protect and supply feeders or branch circuits.

SUPPORT AND ARRANGEMENT OF BUSBARS AND CONDUCTORS
408.3

Busbars shall be held firmly in place in the enclosure and shall be arranged in such a way to allow adequate space for conductors to be terminated. Busbars shall be sized with enough capacity to handle the normal currents in amps of the electrical system. In addition, they shall carry safely any type of short-circuit or ground-fault condition.

CONDUCTORS AND BUSBARS ON A SWITCHBOARD OR PANELBOARD
408.3(A)

Conductors and busbars on a switchboard, panelboard, or control board shall be so located as to be free from physical damage. Service sections of such boards shall be separated from the other electrical components. These components shall be properly secured in an approved manner. 

Note, conductors entering a certain section shall terminate in such section, except where it is not practical for control, interconnecting conductors, or other conditions of use.

OVERHEATING AND INDUCTIVE HEATING
408.3(B)

The arrangement of busbars and conductors shall be such as to avoid overheating due to inductive effects. The inductive effect of each conductor is neutralized when grouping all conductors together. To accomplish the minimizing of heating effects, the ungrounded (phase) conductors, grounded (neutral) conductors, and equipment grounding conductors, where used, shall be in the same enclosure, raceway, cable, cord, etc. (See Figure 7-1)

显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    51 IO口模拟串口通讯C源程序
    8){fontsize_6562.style.fontSize=(--curfontsize_6562)+"pt";fontsize_6562.style.lineHeight=(--curlineheight_6562)+"pt";}'>减小字体 增大字体#include reg51.hsbit BT_SND =P1^0;sbit BT_REC =P1^1;/******************
    rain 51单片机
    清华大学的经典ARM学习教材,全中文版
    特附上首页的目录,一看便知道有无价值前 言................................................................................................................................................1第一章 嵌入式系统的硬件构成....................
    11dong330 ARM技术
    嵌入式C C++语言精华
    呵呵~一些好的建议!我看了,不错。介绍给大家对于概念的理解有很大的帮助!
    黑衣人 嵌入式系统
    中科蓝讯【RT-Thread RISC-V 评估板】DS18B20测温
    DS18B20是我们常用的一款测温芯片,这次我们在AB32VG1评估板上挂载DS18B20实现测温功能。DS18B20驱动时序可百度,这里不再赘述。新建工程,添加测温代码如下:#define DS18B20_DQ GET_PIN(E, 7) //DQ数据线//复位DS18B20void DS18B20_Rst(void){rt_pin_mode(DS18B20_DQ, PIN_MODE_OUTPU
    火辣西米秀 国产芯片交流
    开发高质量的、随时修改的WinCE应用程序UI的思路?
    [quote]引用 3 楼 91program 的回复:底层用驱动实现,和用EVC或.Net没有关系功能实现上,都可以实现的性能差多少,要看硬件配置,如果配置高一些,两者的性能是差不多的。就是担心硬件的配置,跑.Net会吃力EVC也要分使用MFC或SDK,如果是MFC,修改界面也很快的。当然前提是应用的框架好!所以一切,在于设计,不在于用EVC或.Net。所以不要对工具抱太多幻想---用.Net开
    winloop 嵌入式系统
    megachips血压管理模块的资料
    大家好,想学习下megachips的血压管理模块方面的知识,找好久没找到。谁能提供下,谢谢!
    pqj325 医疗电子

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved