• 本课程为精品课,您可以登录eeworld继续观看:
  • OVERCURRENT PROTECTION - 408.36
  • 登录
课程介绍
相关标签: 电子系统
Switchboards are designed with busbars for fuses or circuit breakers that are used for protecting and supplying feeders and branch circuits. Panelboards are designed with a permanently installed main circuit breaker or single set of fuses for disconnecting the number of circuit breakers or fuseholders installed to protect and supply feeders or branch circuits.

SUPPORT AND ARRANGEMENT OF BUSBARS AND CONDUCTORS
408.3

Busbars shall be held firmly in place in the enclosure and shall be arranged in such a way to allow adequate space for conductors to be terminated. Busbars shall be sized with enough capacity to handle the normal currents in amps of the electrical system. In addition, they shall carry safely any type of short-circuit or ground-fault condition.

CONDUCTORS AND BUSBARS ON A SWITCHBOARD OR PANELBOARD
408.3(A)

Conductors and busbars on a switchboard, panelboard, or control board shall be so located as to be free from physical damage. Service sections of such boards shall be separated from the other electrical components. These components shall be properly secured in an approved manner. 

Note, conductors entering a certain section shall terminate in such section, except where it is not practical for control, interconnecting conductors, or other conditions of use.

OVERHEATING AND INDUCTIVE HEATING
408.3(B)

The arrangement of busbars and conductors shall be such as to avoid overheating due to inductive effects. The inductive effect of each conductor is neutralized when grouping all conductors together. To accomplish the minimizing of heating effects, the ungrounded (phase) conductors, grounded (neutral) conductors, and equipment grounding conductors, where used, shall be in the same enclosure, raceway, cable, cord, etc. (See Figure 7-1)

显示全部 ↓
推荐视频

    猜您喜欢

    推荐帖子

    深入了解汽车电子环境
    如果需要对汽车电子环境有深入的理解,那就一定要熟悉ISO16750,对于我们工程师来说,需要建立实验条件和相应的选型之间的关系。需要理解条件=》模块=》电路=》元件这样的思维过程。需要说明的是,标准的形成正是不停的通过事故,错误,经验累积起来的认识,我们可以通过这些标准和我们所作的项目不断的深入去理解这个。正因为如此,标准总是不断的在翻新,这正是产品在发展,使用体验在发展的过程。ISO16750一
    七月七日晴 汽车电子
    求大神帮忙 基于51单片机的一个模拟电梯的程序
    第一次发帖,谢谢因为单片机基础很差,所以感觉有点吃力要求:1.设计一个三层或四层电梯模型2.利用单片机实现电梯运行的控制和实时显示(显示上升状态、下降状态、当前处于哪一层、在哪一层停止等信息)。3.电源接通后,若没有人按下停止按键,它就以每层3秒的速度一直上下运行,若有人按下某一层的停止按键,它就会在相应的那一层停止4秒钟,并伴有开门和关门的声音提示(蜂鸣器)。4.编写单片机控制和显示程序。
    ztp505987751 51单片机
    嵌入式入门
    刚刚开始进去linux的世界,不知道从哪里开始入手,于是在网上找到了电子工程的论坛,并成功注册成为会员,如今我已经在我的XP系统下建立了属于我的linux系统ubuntu11.04,并熟悉常用的linux指令,并建立好了ARM-linux交叉编译环境。接下来的是进一步的ARM嵌入式的学习和软件开发。我目前想学的是Qt图形界面的软件开发,希望各位前辈多多指教。
    prodigy-gavin Linux开发
    问一个基础的问题 WinDbg 如何在函数中间下断点?
    最近刚开始学习驱动...刚开始学会怎么调试驱动程序 如bu MyDDK!DriverEntry但是下断点能不能不把断点下在函数的入口??我想下在函数里面的某些部分请问 改如何实现??
    yqivy 嵌入式系统
    编码器的型号
    [i=s] 本帖最后由 zk643 于 2021-11-18 16:26 编辑 [/i]谁对编码器有了解,在示波器上拆下两个旋钮编码器,外观是一模一样的,就是有一种有循环档位一个没有,再拆开以后发现里面不太一样,想在网上买这两种但不知道该怎么选型号
    zk643 分立器件
    【MSP430共享】MSP430常见问题汇总(强烈推荐)
    这是利尔达总结最近10年430芯片开发过程中遇到的常见问题和解决办法,讲得比较实际,强烈推荐[[i] 本帖最后由 fengzhang2002 于 2011-9-9 14:42 编辑 [/i]]
    fengzhang2002 微控制器 MCU

    推荐内容

    可能感兴趣器件

    完成课时学习+分/次

     
    EEWorld订阅号

     
    EEWorld服务号

     
    汽车开发圈

     
    机器人开发圈

    About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

    站点相关: 汽车电子 智能硬件

    北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

    电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved